Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Irvine, CA
Gate installation in Irvine usually means working inside an HOA-governed village, matching a community-wide hardware spec, and timing the job around board approvals. Kensington Gate Repair handles that end to end: we measure, quote, pull the right operator for your system, and install residential and commercial gates across every Irvine village. Call (833) 320-4513 for a free estimate, and you’ll get a written price before any work is scheduled.
Why Irvine Homes Are Different
Irvine is a master-planned city built almost entirely around homeowner associations and village associations. Most gate work here happens on shared community gates, pool gates, and driveway gates governed by HOA architectural rules, not on standalone residential fencing. That means any technician who wants to work in Irvine needs to understand HOA approvals, community-wide standards, and shared-access logistics that simply don’t exist in neighboring Santa Ana’s or Tustin’s older, individually-owned housing stock.
Irvine’s homes also share a common era and style. This is overwhelmingly planned-development construction from the 1970s onward: Mediterranean and Spanish Revival stucco homes, townhomes, and condos organized into named villages. Many gates are shared across attached units or community entries rather than owned by a single detached home. The warm, dry, sunny climate with very low rainfall means gates here rarely fail from rot or flood damage. Instead we see UV-driven fading, dried-out wood, and sun-warped composite or vinyl, plus occasional Santa Ana wind stress on lightweight gates. A gate that would last twenty years somewhere with real winters can look tired after a decade of Irvine sun, and the hardware shows it.
Styles & brands we work with
Our Main Irvine Services
Most Irvine calls start with one of two problems: a gate that won’t open or close, or an electric operator that has stopped responding entirely. Here’s how each works here.
Gate Repair in Irvine
This covers the mechanical side: hinges, rollers, tracks, chain drives, and the physical gate itself. In Irvine, many repairs are on shared HOA assets, so we match the existing hardware rather than swapping in whatever is on the truck. A sagging gate at a Woodbridge pool entrance needs a different fix than a bent track on a Northwood driveway gate. We diagnose the actual failure and quote the repair before touching anything. Gate Repair in Irvine covers the full scope.
Electric Gate Repair in Irvine
Electric and automated gates fail differently here than they do inland. Irvine’s consistent sun loads bake control boards and photoelectric sensors year-round, and a motor that overheats once too often will eventually quit. We work on operators from DoorKing, Elite, LiftMaster, and Mighty Mule, so we’re not trying to force one brand into every situation. If your gate buzzes but won’t move, or opens halfway and reverses, Electric Gate Repair in Irvine is the page that explains what’s happening.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Irvine
Gate installation in Irvine usually means working inside an HOA-governed village, matching a community-wide hardware spec, and timing the job around board approvals. Most of what we replace or install here is on attached properties and shared community entries built during the planned development boom that started in the 1970s, so the job is as much about coordination as it is about setting posts and hanging the gate. If you own a detached home in an older pocket of the city, the work is more straightforward, but most Irvine installations live under an architectural committee. We handle the whole process under one contract. For more detail on what installation includes, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re entering a code or pressing a remote every time because your existing gate has no operator, or the old operator has failed beyond economical repair.
What it costs in Irvine
Automatic gate installation in Irvine typically runs $1,800 to $4,500, depending on operator brand and whether we’re adding safety edges and a keypad.
How we do it
We pull the old operator if one exists, mount the new one to match your gate’s swing or slide direction, wire the control board, and test the full open-close cycle, including safety reversal.
Driveway Gate Installation
Signs you need it
Your driveway opening is unfenced or has a manual gate, and you want controlled access for vehicles.
What it costs in Irvine
Driveway gate installation in Irvine runs $2,200 to $6,800 for a new gate and operator, with steel or aluminum gates on the higher end.
How we do it
We measure the driveway width and slope, set posts at the correct depth for Irvine’s soil, hang the gate, then mount and wire the operator to match the gate’s weight and travel distance.
Sliding Gate Installation
Signs you need it
Your driveway is too short or too steep for a swing gate, or the HOA or city requires a sliding configuration for the opening.
What it costs in Irvine
Sliding gate installation in Irvine typically runs $2,200 to $6,800, including the track, rollers, and motor rated for the gate’s length.
How we do it
We set the track on a level concrete footing sized for the gate’s travel, mount the rollers, hang the sliding leaf, then install the operator and adjust the limit switches so the gate stops cleanly at both ends.
What Gate Installation Costs in Irvine
| Item | Typical range in Irvine |
|---|---|
| Manual gate installation | $800 – $2,000 |
| Automatic gate installation | $1,800 – $4,500 |
| Driveway gate installation | $2,200 – $6,800 |
Do I need HOA approval before installing a gate in Irvine?
Yes, in nearly all Irvine villages. Most HOAs require architectural committee sign-off before any gate is replaced or installed, and many also mandate a specific operator model to match the community standard. We can prepare the spec sheet and paperwork your manager will want.
How long does a gate installation take in Irvine?
Most single-gate installations finish in one day once the HOA has approved the plans and parts are on site. Custom-built gates add a week or more for fabrication. We’ll give you a firm schedule in the written quote so you’re not left guessing.
Brands We Service in Irvine
We work on virtually every major gate brand you’ll find in Irvine’s villages, including DoorKing, Elite, LiftMaster, and Mighty Mule. We keep common parts for these operators in local stock, so most repairs don’t wait on a shipment. See our brands for the full range.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Irvine, CA
| Service | Typical range in Irvine |
|---|---|
| Gate sensor or safety loop repair | $140 – $410 |
| Gate motor or control board replacement | $375 – $1,100 |
| Hinge, roller, or track repair | $160 – $590 |
| Manual gate installation | $800 – $2,000 |
| Automatic gate installation | $1,800 – $4,500 |
| Driveway gate installation | $2,200 – $6,800 |
| Sliding gate installation | $2,200 – $6,800 |
| Full gate replacement | $1,450 – $4,200 |
| Emergency gate repair | $190 – $510 |
Irvine prices run slightly higher than nearby cities when HOA compliance adds spec matching, paperwork time, or a required vendor approval step. Every quote is fixed and agreed before work starts, so you won’t see a larger invoice after the job is done.
Neighborhoods We Serve in Irvine
We cover all of Irvine, including the villages where shared gates are the norm and the few older pockets where homes are individually owned. Response time across the city is typically same-day or next-day for repair calls, depending on the schedule.
- Woodbridge
- Northwood
- Westpark
- University Park
- Turtle Rock
Service Area – Cities Near Irvine
Kensington Gate Repair works throughout central Orange County. If you’re just over the border, we also serve Tustin, CA, Santa Ana, CA, North Tustin, CA, and San Joaquin Hills, CA. Call us from any of those cities and we’ll schedule the same way we do for Irvine.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Irvine
Most repair calls in Irvine can be scheduled same-day or next-day. Emergency calls, like a gate stuck open at a community entry, get priority. We’ll give you a straight arrival window when you call, not a vague “sometime this week.”
We can prepare whatever your property manager or architectural committee needs: operator spec sheets, product data, and a written scope of work. We can’t submit on your behalf since the owner or HOA must sign, but we make the packet easy to hand over.
We serve the entire city, including 92617, 92618, 92619, and 92620. That covers the UC Irvine area, the Great Park neighborhoods, and the business district around the Spectrum, plus every village in between.
Call (833) 320-4513 for a free estimate on any gate repair or installation in Irvine. You’ll talk to a gate specialist, get a straight diagnosis, and see a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irvine Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Diego Castillo"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Rosa Delgado"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Gilbert Torres