Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in La Verne, CA
Gate installation in La Verne is a different job than it is ten miles south. The housing stock here runs from 1950s detached homes with original wrought iron to newer foothill subdivisions on the north edge of town, and the Santa Ana winds that funnel down the San Gabriels put real stress on every post, hinge, and weld. Kensington Gate Repair installs, repairs, and services gates across La Verne, and we diagnose the actual problem before quoting a price. Call (833) 320-4513 for a free estimate on any gate work in the 91750 ZIP code.
Why La Verne Homes Are Different
La Verne sits right against the San Gabriel foothills, and the dry Santa Ana winds funnel through this city harder than the flatland communities to the south. That wind is the real driver of gate work here. It works vinyl and wrought-iron gates loose at the hinges and posts, especially on the north-side foothill lots where gusts come straight off the mountains. We routinely see gate posts leaning a few degrees out of plumb at the base in La Verne’s hillside properties, a failure pattern that barely shows up in the sheltered neighborhoods farther south.
The housing mix also shapes the work. Old Town La Verne holds historic homes with narrow driveway entries and older ornamental gates, while the mid-century subdivisions from the 1950s through 1970s have a lot of wrought-iron driveway and side-yard gates with corroded hinges and posts set in aging concrete. Newer tract developments add vinyl and steel gates that bake in the dry inland sun. Hot, dry summers plus seasonal wind events mean La Verne gates sit in low-moisture, sun-exposed conditions where hinge hardware wears and loosens faster than in coastal LA County. Re-hanging, hinge reinforcement, and post anchoring on wind-exposed foothill properties is the signature job here.
Styles & brands we work with
Our Main La Verne Services
Two services account for most of what La Verne homeowners call us about, and both come down to the same thing: a gate that no longer closes, latches, or powers up the way it should.
Gate Repair in La Verne
La Verne’s older housing stock means a lot of manual gates that have spent decades in the sun and wind. Hinges corrode, posts shift in aging concrete, and latches stop lining up. A tilted gate that drags on the driveway or swings open on its own is a structural problem, not just a hardware swap. We inspect the posts, hinge welds, and latch alignment before recommending a repair, because re-hanging a gate on a failing post buys you months, not years. For the full scope of manual gate work in La Verne, see Gate Repair in La Verne.
Electric Gate Repair in La Verne
Automated gates fail differently in La Verne than they do near the coast. Dust from the dry foothills gets into limit switches and control boards, and Santa Ana gusts push against the gate leaf, which overloads motors calibrated for calm conditions. We work on operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we diagnose electrical faults the same way we diagnose mechanical ones: test before replacing. Read the full breakdown at Electric Gate Repair in La Verne.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in La Verne
New gate installation in La Verne usually means one of two situations: a homeowner replacing an original gate on a 1950s or 1960s property where the posts are done, or a newer foothill property where the wind has already compromised a gate that was never built for it. In both cases, the install has to account for La Verne’s dry climate and Santa Ana gusts, which means proper post depth, heavy-gauge hinges, and hardware that will not loosen in the first wind season. We handle everything from site measure to final adjustment under one company, and the full service line is covered at Gate Installation.
Automatic Gate Installation
Signs you need it
A driveway or entry gate you open and close by hand multiple times a day, or a manual gate on a property where security and convenience now justify automation.
What it costs in La Verne
Automatic gate installation in La Verne typically runs $3,700 to $8,900, with the operator, safety sensors, and control system included in that range.
How we do it
We measure the gate and posts, specify the right operator from the nine brands we work on, set the mounting points, run the power feed, install safety edges and photo eyes, and test full open/close cycles before we leave.
Driveway Gate Installation
Signs you need it
A driveway gate that is rusted through at the bottom rail, dragging on the pavement, or too far out of plumb to be re-hung on its existing posts.
What it costs in La Verne
New driveway gate installation in La Verne generally lands between $2,100 and $6,100 depending on material, gate width, and whether posts need to be reset or replaced.
How we do it
We check post plumb and footing condition first, then build or order the gate to the exact opening, hang it with heavy hinges or a slide track, and adjust the latch so it closes clean every time.
What Gate Installation Costs in La Verne
| Item | Typical range in La Verne |
|---|---|
| Driveway gate installation | $2,100 – $6,100 |
| Automatic gate installation | $3,700 – $8,900 |
| Gate operator installation | $900 – $2,300 |
Does a new gate installation in La Verne include the posts?
If the existing posts are solid and plumb, we can often reuse them. In La Verne, especially on wind-exposed foothill lots, we frequently find posts leaning at the base or set shallow in old concrete, and those get replaced. Call (833) 320-4513 for a free site measure.
Can you install a gate on a sloped La Verne driveway?
Yes. Sloped driveways on the north side of La Verne require either a swing gate with bottom clearance cut to the grade or a slide gate on a raised track. We measure the slope before quoting so you don’t end up with a gate that binds halfway open.
Brands We Service in La Verne
We work on virtually every major gate brand, including LiftMaster, FAAC, BFT, and Linear. Because we carry parts for competing systems rather than pushing one manufacturer, a repair in La Verne usually gets diagnosed and fixed without waiting on a backordered proprietary part. See our brands for the full list of systems we cover.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in La Verne, CA
| Service | Typical range in La Verne |
|---|---|
| Gate repair | $195 – $850 |
| Electric gate repair | $395 – $1,550 |
| Gate spring replacement | $225 – $475 |
| Gate opener repair | $375 – $1,250 |
| Gate hinge replacement | $195 – $475 |
| Gate sensor replacement | $195 – $425 |
| Gate circuit board replacement | $325 – $850 |
| Driveway gate installation | $2,100 – $6,100 |
| Automatic gate installation | $3,700 – $8,900 |
| Gate operator installation | $900 – $2,300 |
What pushes a La Verne job toward the upper end of these ranges is usually the site, not the part. A gate on a wind-exposed north-side lot with posts leaning out of plumb takes more labor to correct than the same gate on a sheltered flat street, and older homes in the Old Town area sometimes require custom hinge fabrication because the original hardware is no longer made. Whatever the number, we quote it before any work starts and the price you agree to is the price you pay.
Neighborhoods We Serve in La Verne
We cover the entire 91750 ZIP code, from the Old Town core out to the foothill developments on the north edge of town. Response time across La Verne is typically the same day or next morning for repair calls.
- Old Town La Verne
- North La Verne foothills
- The La Verne Heights area
- Marshall Creek neighborhoods
- Areas around Brackett Field and the University of La Verne
Service Area – Cities Near La Verne
Kensington Gate Repair works throughout the eastern San Gabriel Valley and the foothill communities, so if you’re in Claremont, CA, Pomona, CA, Montclair, CA, or Upland, CA, we can schedule the same specialist crew that handles our La Verne calls.
Serving La Verne, CA — Our Local Coverage Area
We’re based in the La Verne area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in La Verne
Most La Verne repair calls are answered the same day or the next morning. Kensington Gate Repair is based nearby in Montclair, so we’re already in the area regularly. For a gate that won’t close or secure, call (833) 320-4513 and we’ll give you a straight arrival window over the phone.
It depends on the scope. A like-for-like gate replacement on existing posts typically does not, but new post footings, extensive concrete work, or a new driveway entry can trigger La Verne’s permitting requirements. We’ll tell you what applies to your specific property before the job starts.
Yes. La Verne has a number of HOAs, especially in the foothill developments, and many have architectural guidelines for gate height, material, and style. We install to your HOA’s approved spec and can work from their documents so the gate passes review the first time.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What La Verne Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Marisol Hernandez"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Eduardo Garcia