Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Claremont, CA
Gate installation in Claremont usually means working around a historic house, a mature lot, or a hillside driveway rather than a clean-slate tract home. We install wood driveway gates, wrought-iron pedestrian gates, and automated swing or slide systems on properties where the gate has to sit right with a 1920s Craftsman or a 1950s Spanish Colonial Revival. If you’re looking at a sagging original gate that’s beyond repair, or you need a new gate hung and automated from scratch, call Kensington Gate Repair at (833) 320-4513 for a free measure and a written price before any work starts.
Why Claremont Homes Are Different
Claremont’s housing stock is not what you find in Rancho Cucamonga or Pomona tract subdivisions. The core of the city, from the area around the Village north toward the Claremont Colleges, is dominated by early-1900s to 1950s Craftsman, bungalow, and Spanish Colonial Revival homes. Those houses often still have their original driveway gates: wood picket gates with period hinges, or ornamental wrought iron with scrollwork that owners would rather repair than replace. A gate job here is frequently a preservation decision, not a utility decision. Homeowners ask whether the existing gate can be rehung, repaired, and refinished, and whether the original character can be kept while adding an electric operator.
The climate is the second factor. Claremont sits at the base of the San Gabriel Mountains in a hot, dry inland zone with intense summer sun and periodic Santa Ana winds. Wood gates warp and dry out in July and August. Finishes fade and crack within a few seasons. The same wind that pushes smoke out of the canyons also puts lateral load on gate posts and hinges, loosening hardware and pulling post footings out of plumb. We recommend seasonal hardware tightening in the fall, after the worst of the summer heat, and again in spring if Santa Ana winds have been active.
The third factor is the landscape itself. Many of the older lots have mature citrus and oak trees, and dense planting close to driveway and side-yard gates. Roots heave posts. Dropped limbs and leaf litter bind swing gates. Soil movement from irrigation and root growth is the single most common cause of sagging gate posts we see in the 91711 ZIP code. A gate that scrapes the ground or will not latch is usually not a broken hinge: it is a post that has shifted.
Styles & brands we work with
Our Main Claremont Services
The two calls we get most in Claremont are repair calls on existing gates and operator calls on automated systems that have stopped working.
Gate Repair in Claremont
Most repair calls in Claremont are on original wood driveway gates and ornamental iron pedestrian gates that have been in place for decades. The usual problems are sagging from post movement, seized or worn hinges, rotted wood at the bottom rail, and latch hardware that no longer aligns. On older Craftsman homes around the Village, we often match existing hardware styles rather than swapping in modern parts that would look wrong. For the full repair picture in the 91711 ZIP code, see our Gate Repair in Claremont page.
Electric Gate Repair in Claremont
When a gate stops opening, fails to close fully, or reverses for no apparent reason, the fault is usually in the operator, the control board, the safety sensors, or the ground loop. Claremont’s older automated gates are often running on equipment that was installed when the house was remodeled, and we frequently see failed control boards and worn gearboxes rather than mechanical hinge failures. Our Electric Gate Repair in Claremont page covers motors, loops, sensors, and access systems in detail.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Claremont
Gate installation in Claremont is rarely a simple swap. On a 1920s Craftsman near the colleges, the new driveway gate has to sit correctly in an opening framed by mature trees, a heaving concrete driveway, and original pilasters that may have settled. On a mid-century property in the foothills, the gate may have to handle slope and wind. We measure the opening, check post plumb and footing depth, and quote a written price covering the gate, hardware, and any automation before work begins. If the job is a new build, a replacement, or a conversion from manual to electric, the process starts with the same careful site visit. For the full scope of what we install, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open a manual driveway gate, or you need controlled access for a rental unit, studio, or home-based business on the property.
What it costs in Claremont
Automatic gate systems in Claremont typically run $2,500 to $9,500 installed depending on operator type, gate size, and the electrical work required.
How we do it
We survey the driveway and gate weight, choose the correct swing or slide operator for the site, run power and control wiring, install safety edges and photo eyes, and program the remotes, keypad, and limits before testing the full open-close cycle.
Driveway Gate Installation
Signs you need it
The existing driveway gate is rotted, severely rusted, leaning, or not worth rehinging and refinishing for what the repair would cost.
What it costs in Claremont
A new manual driveway gate in Claremont typically runs $1,500 to $5,000 depending on material (wood, wrought iron, or steel frame), width, and whether the posts can be reused.
How we do it
We remove the old gate, inspect and reset or replace the posts, hang the new gate with hardware sized for the weight, and adjust the latch, stops, and swing clearances so it closes square against the existing fence line.
What Gate Installation Costs in Claremont
| Item | Typical range in Claremont |
|---|---|
| Manual wood driveway gate | $1,500 – $4,000 |
| Wrought iron driveway gate | $2,500 – $6,500 |
| Automatic gate system with operator | $2,500 – $9,500 |
These ranges assume standard residential openings and do not include major electrical upgrades, long power runs, or commercial operators. On older Claremont properties, expect the final quote to move if posts need to be reset into new footings or if the power source is far from the gate.
Do I need a permit for a gate in Claremont?
Most residential gate repairs and like-for-like replacements do not require a permit, but new automatic gate installations can trigger review if they sit close to a sidewalk or public right-of-way. We confirm the local requirement for your exact property during the estimate. Call (833) 320-4513 to schedule the measure.
Can you match an original Craftsman or Spanish Colonial gate style?
Yes. We regularly build new wood driveway and pedestrian gates to match original period details on Claremont’s older homes, including picket spacing, rail proportions, and period-appropriate iron hardware. We quote the match and the construction in writing before any work starts.
Brands We Service in Claremont
We work on LiftMaster, FAAC, BFT, and Linear operators, among others, and we carry common control boards, remotes, receivers, and safety parts for those brands in our service vehicles. We can also order less common components quickly if your system is running older equipment. See our brands for the full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Claremont, CA
| Service | Typical range in Claremont |
|---|---|
| Gate repair service call with diagnosis | $95 – $195 |
| Gate hardware replacement or hinge repair | $150 – $500 |
| Gate welding repair | $200 – $800 |
| Gate replacement | $1,500 – $9,500 |
| Manual wood driveway gate installation | $1,500 – $4,000 |
| Wrought iron driveway gate installation | $2,500 – $6,500 |
| Automatic gate operator installation | $2,500 – $9,500 |
| Electric gate repair | $175 – $600 |
| Gate opener motor replacement | $450 – $1,900 |
| Safety sensor or photo eye replacement | $200 – $450 |
Prices in Claremont move higher when posts need to be reset into new concrete footings, when the power run to the gate is long, or when the existing gate is heavy ornamental iron that needs welding rather than bolted repair. Every job is quoted and agreed before we start; you will never see a surprise line item at the end.
Neighborhoods We Serve in Claremont
We cover all of the 91711 ZIP code, from the historic blocks near the Village and the Claremont Colleges to the newer subdivisions on the city’s edges. Response time for most Claremont repair calls is same day or next day depending on call volume, and installations are scheduled around our measure-and-quote first visit.
- The Village
- Claremont Village Expansion
- North Claremont (near the foothills)
- Claraboya
- East Claremont
Service Area – Cities Near Claremont
Kensington Gate Repair is based in Montclair, CA and serves the surrounding Inland Empire foothill communities. We regularly work in La Verne, CA, Upland, CA, and San Antonio Heights, CA. If your gate is giving you trouble, call (833) 320-4513 and we’ll confirm coverage for your address.
Serving Claremont, CA — Our Local Coverage Area
We’re based in the Claremont area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Claremont
Most Claremont repair calls are scheduled same day or next day. Emergency situations like a gate stuck open or a vehicle trapped inside a driveway are prioritized when you call (833) 320-4513. We’ll give you a realistic arrival window when you book.
Many Claremont neighborhoods, particularly the newer subdivisions and some of the historic districts, have architectural review rules for visible gate changes. If your property is in an HOA, check the governing documents before we start. We can provide drawings and specs if your HOA requests them for approval.
Call (833) 320-4513 and we’ll set a time to measure the opening, inspect the posts, and discuss material and automation options. The estimate is free, and you’ll receive a written price covering the gate, hardware, and any automation before any work is scheduled.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Claremont Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Marisol Hernandez"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Eduardo Garcia