Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Chino, CA
Kensington Gate Repair handles gate installation in Chino for both sides of this city’s split personality: the older ranch and equestrian lots west of the 71 where gates were often welded on-site decades ago, and the dense 2000s-era tracts of east Chino and the Preserve where builder-grade gate hardware is now failing in predictable waves. Chino’s intense summer heat and Santa Ana winds warp vinyl, dry out wood, and stress operators harder than coastal climates ever do. If you need a gate installed, repaired, or diagnosed, call us at (833) 320-4513, and we’ll send a gate specialist, not a general handyman.
Why Chino Homes Are Different
Chino’s gate work splits along a line that runs roughly through the city. West of the 71 in 91710, you’ll find aging single-story ranch homes and equestrian properties with long driveway gates and corral entrances that were often custom-built or owner-welded. These gates carry decades of Chino sun, occasional winter rain, and the kind of hinge wear that comes from heavy use on uneven ground. East of the 71 in 91708, the Preserve and surrounding master-planned tracts are a different story entirely. Those neighborhoods went in during the 2000s and 2010s with builder-standard vinyl, wood, and ornamental iron gates, most of them paired with the same entry-level operator and hinge package across entire streets. Now those components are hitting the 10 to 20 year mark, and we see failure clusters: one neighbor’s operator board burns out, and three more on the same block follow within a year. HOA rules in those tracts often dictate exact gate style, color, and hardware finish, which means a repair that would work fine on a west Chino ranch property can fail HOA review on an east Chino courtyard gate. The climate adds another layer: dry summer heat fades and chalks finishes while Santa Ana gusts rack gates on their hinges, and the winter rains that do arrive swell wood and rust steel hardware that has gone years without attention.
Styles & brands we work with
Our Main Chino Services
Chino homeowners and property managers call us for two reasons more than any other: a gate that will not open or close properly, and an electric operator that has stopped responding. Each of those has its own dedicated Chino page below.
Gate Repair in Chino
Gate repair in Chino means dealing with the full range: sagging iron driveway gates on west-side equestrian properties, misaligned vinyl gates on east-side tract homes, and everything in between. The local housing stock means we see plenty of owner-built and decades-old gate hardware in 91710, where hinge posts have shifted and gates have been re-welded multiple times, while 91708 jobs tend to involve builder-grade hardware that was never meant to last twenty Chino summers. We diagnose the root cause on the first visit and carry the parts to fix most gates in one trip. Gate Repair in Chino covers the full scope of what we see out here.
Electric Gate Repair in Chino
Electric gate repair in Chino is where we spend most of our time, because automated gates are everywhere on this city’s newer side and increasingly common on its older side too. East Chino and the Preserve are dense with builder-installed operators that are now failing in clusters, and the HOA-driven need to match a specific gate look means the operator and control board often have to integrate with hardware we did not install. On west Chino ranch properties, electric operators are frequently retrofitted onto gates that were originally manual, which creates its own set of alignment and safety sensor issues. Electric Gate Repair in Chino goes deeper into what that work involves.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Chino
Gate installation in Chino means two different projects depending on where you live. On the west side, we are often replacing or re-hanging owner-built ranch and corral gates that have outlived their hardware. On the east side and in the Preserve, we are typically installing new builder-standard vinyl, wood, or ornamental iron gates that must match an HOA-approved style and color exactly. Chino’s dry heat and Santa Ana winds mean we select hardware and finishes that hold up to sun, wind, and the occasional heavy rain without warping or fading. Our Gate Installation service covers everything from a simple driveway gate replacement to a full automatic gate system with operator, safety edges, and access controls.
Automatic Gate Installation
Signs you need it
Your gate is heavy enough that opening it manually is a daily hassle, or you want controlled access without getting out of the car.
What it costs in Chino
Automatic gate installation in Chino runs from $3,200 to $9,500 depending on gate size, operator type, and access controls.
How we do it
We measure the opening, check for level ground and proper setbacks, install the gate and operator, run the power and low-voltage wiring, then set safety edges, sensors, and any keypad or remote system.
Driveway Gate Installation
Signs you need it
Your existing driveway gate sags, binds, or no longer closes evenly, or you are adding a gate to a driveway that has never had one.
What it costs in Chino
Driveway gate installation in Chino ranges from $1,500 to $6,000 for a manual gate and $3,200 to $9,500 when an operator is included.
How we do it
We measure the driveway opening, confirm soil and slope conditions, set posts in concrete to a depth that resists Chino’s wind and shifting ground, then hang and align the gate for smooth operation.
Sliding Gate Installation
Signs you need it
Your driveway slopes up from the street, or you do not have room for a gate to swing inward without hitting a car, wall, or landscaping.
What it costs in Chino
Sliding gate installation in Chino runs from $2,500 to $8,000, with automatic operators adding significantly to the total.
How we do it
We set a concrete track or cantilever base, install the sliding gate panel and rollers, then hang and balance it so it travels without binding through Chino’s heat-expanded steel.
What Gate Installation Costs in Chino
| Item | Typical range in Chino |
|---|---|
| Manual driveway gate | $1,500 – $6,000 |
| Automatic gate system | $3,200 – $9,500 |
| Sliding gate (manual or auto) | $2,500 – $8,000 |
Does gate installation require HOA approval in Chino?
Yes, in most of east Chino and the Preserve. HOAs there typically require written approval before any gate installation, with exact style, color, and hardware specs you must match. We can work from your HOA’s approved list.
How long does a gate installation take in Chino?
Most manual gate installations are done in one day. Automatic gate installations usually take one to two days depending on the power run, operator type, and whether we are adding safety edges, loops, or an access system.
Brands We Service in Chino
We work on gate operators and hardware from our brands including LiftMaster, FAAC, and BFT. Because we service all of them, we stock common replacement parts locally and can usually diagnose and repair a Chino gate without waiting on a factory part to ship.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Chino, CA
| Service | Typical range in Chino |
|---|---|
| Gate installation, manual | $1,500 – $6,000 |
| Automatic gate system | $3,200 – $9,500 |
| Electric gate installation | $3,200 – $9,500 |
| Driveway gate installation | $1,500 – $6,000 manual / $3,200 – $9,500 auto |
| Sliding gate installation | $2,500 – $8,000 |
| Gate repair, hinge and weld | $180 – $460 |
| Gate operator repair | $220 – $580 |
| Control board replacement | $260 – $640 |
| Sensor and safety edge replacement | $160 – $370 |
What pushes a Chino job higher is usually access: long ranch driveways on the west side mean longer power runs and heavier gates, while east-side HOA requirements can force specific hardware finishes that cost more than generic parts. We quote the full price before any work starts, and that number is what you pay.
Neighborhoods We Serve in Chino
We cover all of Chino, 91708 and 91710, and typically reach most addresses within one to two hours. The list below shows the range of gate work we see, from old ranch properties to newer tract homes.
- The Preserve and east Chino tracts (91708)
- West Chino ranch and equestrian lots (91710)
- College Park
- Chino Airport area
- Downtown Chino historic district
Service Area – Cities Near Chino
Beyond Chino, our gate repair and installation service area includes Los Serranos, CA, Ontario, CA, Montclair, CA, and Eastvale, CA. If you are a few minutes outside Chino, call us, the odds are good we cover you.
Serving Chino, CA — Our Local Coverage Area
We’re based in the Chino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Chino
We typically reach Chino addresses within one to two hours for urgent gate failures, whether that is a gate stuck open and blocking a driveway or an operator that will not respond. Call (833) 320-4513 and we will give you a straight arrival window.
Most gate installations do not trigger a city permit, but east Chino and Preserve HOAs often require written approval that dictates style, color, and hardware. We can work from your HOA’s approved list so you do not get a violation notice after the job is done.
Yes, we do this regularly in east Chino and the Preserve. Give us your HOA’s approved style sheet and we will match the gate panel, finish, and hardware exactly, then document the work for your HOA file.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Chino Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Diego Castillo"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Rosa Delgado"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Gilbert Torres