Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Perris, CA
Gate installation in Perris usually means building for the elements: long driveway openings, big wind exposure, and 20-plus-year-old posts that have given up. We install swing and sliding driveway gates, automatic operators, and side-yard privacy gates across the 92570, 92571, and 92572 ZIP codes. Most of our Perris work replaces gates that never fit the lot properly the first time. Call us at (833) 320-4513, and we will tell you honestly whether your gate can be saved or should be replaced.
Why Perris Homes Are Different
Perris sits on the open floor of the Perris Valley, where the Santa Ana winds funnel through and hit every exposed fence line and driveway opening. Homes here went up mostly between the 1980s and the early 2000s, on lots that run a quarter acre to a half acre. That means long driveways, double swing gates at the street, and side yards wide enough to park an RV or horse trailer. The gates on these properties are not decorative afterthoughts. They are full-width steel or wood structures that sit out in the sun all day and catch the wind all night.
We see the same pattern repeatedly in Perris. A double swing gate hangs on posts that were set in the original tract construction. The dry heat pulls moisture out of the wood, the posts crack or rot at ground level, and the hinges start to sag. On sliding gates, dirt and fine valley dust work into the track and the gate starts dragging or jumping the rollers. Vinyl gates fade and get brittle. Gates that would survive fine in a coastal climate fail here in half the time because the heat and wind never let up.
HOAs in the newer master-planned subdivisions around Perris often have design standards for front-facing gates and driveway gates. You may need to match a certain height, color, or material. We have worked enough of those jobs to know what gets approved and what gets sent back. When we quote an installation, we account for the HOA constraints up front so you don’t get surprised mid-project.
Styles & brands we work with
Our Main Perris Services
Two services carry most of our calls in Perris: manual gate repair and electric gate repair. Here is what each one looks like on a Perris property.
Gate Repair in Perris
Most gate repair calls in Perris come down to the same root causes: sun-dried posts, blown-out hinges, and gates that have been pulled out of square by the wind. We rebuild sagging double swing gates by pulling and re-setting posts in new concrete, replacing hinge hardware, and squaring the gate frames. We also handle bent steel from windstorms, rotted wood pickets, and sliding gates that have chewed up their own rollers. If the post is still solid, we can usually save the gate. If it isn’t, we will tell you before we touch anything. Full details on what we repair and what it costs are on our Gate Repair in Perris page.
Electric Gate Repair in Perris
Automated gates fail in predictable ways, and Perris dust makes them worse. We see limit switches that stop working because dirt has built up on the cam, control boards that overheat in the summer, and loop detectors that stop sensing because the wire has cracked in the dry soil. Our electric gate repair work covers motors, control boards, loops, sensors, remote programming, and keypads. If the operator is a LiftMaster, FAAC, BFT, or Linear unit, we carry or can quickly source the parts for it. The detail on diagnostics and repair is on our Electric Gate Repair in Perris page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Perris
Gate installation in Perris almost always comes down to two things: building for the wind load and anchoring in hard, dry soil. The tract-home subdivisions of the 1980s to 2000s and the newer master-planned communities all share the same requirement: a gate that stays true through hot summers, Santa Ana winds, and the slow settling of clay-heavy ground. We install gates with posts set deeper than the original tract spec, hardware rated for the gate’s full weight, and operators matched to the actual duty cycle of a Perris driveway. Whether you are replacing a collapsed side gate or building a new automatic driveway gate for an RV pad, we handle the full job from first measure to final programming. See our Gate Installation hub for details on our installation scope.
Automatic Gate Installation
Automatic gate installation in Perris starts with measuring the actual opening, not the old gate’s dimensions, because the openings we find are rarely square. We then set the posts, mount the gate, run the power and loop wiring, and install and program the operator.
Signs you need it
A manual gate that gets opened twice a day, every day, eventually gets left open at night out of frustration – if the gate gets used that often, an operator pays for itself in security and convenience.
What it costs in Perris
Automatic gate installation in Perris typically runs $4,500 to $11,000, depending on gate width, operator type, and whether we are running new power to the gate.
How we do it
We set gate posts in concrete at a depth that holds the full wind load, hang the gate, run conduit and wiring for power and safety loops, install the operator and safety edges, then program remotes and test the full cycle.
Driveway Gate Installation
Driveway gates in Perris span anywhere from 10 feet to 24 feet and need to clear the family car, the work truck, and often an RV or boat trailer. We build both swing and sliding driveway gates, with steel frames and either wood, vinyl, or ornamental infill.
Signs you need it
If the opening has been widened over the years but the old gate never got rebuilt to match, or if the gate drags or binds every time the ground shifts through the seasons, it is time for a properly sized replacement.
What it costs in Perris
A new driveway gate in Perris, installed with posts and hardware, generally falls between $4,100 and $9,000 before any operator is added.
How we do it
We measure the true opening width, check the slope and ground clearance, set posts with deeper footings than the original build, hang the gate, and then adjust the hinges so the gate closes without dragging.
Sliding Gate Installation
Sliding gates make sense on the long Perris driveways where a swing gate would eat up too much of the yard or fight the slope. We install cantilever and V-track slides with the correct roller hardware for the gate’s full loaded weight.
Signs you need it
A driveway that slopes up toward the house or a gate opening right against a retaining wall usually points toward a sliding gate rather than a swing.
What it costs in Perris
Sliding gate installation in Perris typically runs $5,000 to $11,000, with the steel frame, track or cantilever rollers, and installation included.
How we do it
We lay out the slide path, pour a level footing or install the cantilever posts, mount the track or rollers, set the gate, and then walk the gate through full open and close cycles to check for binding.
What Gate Installation Costs in Perris
| Item | Typical range in Perris |
|---|---|
| Basic gate installation (small wood or vinyl pedestrian/side gate) | $350 – $900 |
| Standard driveway gate installation (steel frame, no operator) | $4,100 – $9,000 |
| Automatic gate installation with operator | $4,500 – $11,000 |
Those are the numbers you should carry into any Perris quote. The price moves up when the gate is wider, when the soil at the post locations is soft or rocky, or when the operator needs a new dedicated circuit run from the panel. We quote a fixed price before any work starts, and that price does not change unless the scope changes in writing.
How long does a gate installation take in Perris?
A basic single gate installation usually takes one day once posts are set and concrete has cured. Driveway gates and automatic systems take two to three days on site, plus a short cure time for footings before we hang the gate and run the final adjustments.
Do I need a permit for a gate installation in Perris?
Many Perris properties can replace an existing gate with no new permit, especially if the gate falls within the original opening. We check current City of Perris and Riverside County requirements for your address before we write the quote, and we always confirm HOA rules too.
Brands We Service in Perris
We work on the operator brands most common in Perris: LiftMaster on residential driveways, FAAC and BFT on commercial and high-cycle systems, and Linear on apartment and HOA gates. We carry common boards, limit switches, remotes, and loop wire on our trucks, and we stock or can source deeper parts for all of those lines. See our brands for the full list we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Perris, CA
| Service | Typical range in Perris |
|---|---|
| Basic gate installation (small wood or vinyl pedestrian/side gate) | $350 – $900 |
| Standard driveway gate installation (steel frame, no operator) | $4,100 – $9,000 |
| Automatic gate installation with operator | $4,500 – $11,000 |
| Sliding gate installation | $5,000 – $11,000 |
| Gate repair service call | $75 – $150 |
| Gate repair hourly service | $85 – $125 per hour |
| Gate spring replacement | $120 – $250 |
| Gate post replacement (steel post, set in concrete) | $350 – $700 |
| Electric gate motor replacement | $600 – $1,400 |
| Electric gate repair service call | $90 – $160 |
| Gate operator repair | $185 – $450 |
| Safety sensor or loop detector repair | $175 – $400 |
Two things push gate pricing up in Perris faster than anywhere else we work. The first is wind damage: a gate that has been racked by a Santa Ana event usually needs the frame re-squared, not just a hinge swap. The second is concrete and soil work, because many of these older tract posts were set shallow and have to be dug out and re-poured to a proper depth. We quote a fixed, line-item price before any work begins, and we never start a job without your written approval of that number.
Neighborhoods We Serve in Perris
We run service calls all over the Perris Valley, from the older tract streets near downtown to the newer subdivisions on the edges of town. Here are some of the neighborhoods where we do regular work:
- May Ranch
- Villages of Avalon
- North Perris
- Lake Perris / Ramona area
- Gavilan Hills
For repair calls in most Perris neighborhoods, we can typically get a truck out the same day or the next morning, depending on how the schedule looks when you call.
Service Area – Cities Near Perris
Kensington Gate Repair covers Perris and the surrounding Riverside County communities. Our crews also handle gate work in Good Hope, CA, Mead Valley, CA, March Air Force Base, CA, and Meadowbrook, CA. If your gate is in any of those areas, the same phone number applies.
Serving Perris, CA — Our Local Coverage Area
We’re based in the Perris area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Perris
For non-emergency repairs, we typically schedule within one to two business days. If a gate is stuck open or won’t close, that changes the priority. Call us at (833) 320-4513 and tell us what the gate is doing – we will tell you over the phone what kind of scheduling window we can hit.
If your Perris home is in an HOA with architectural guidelines, the new gate and any changes to posts, height, or material usually need approval before installation. We can work from the HOA’s spec sheet and build to the approved standard so the job does not get red-tagged after it is done.
We cover the full Perris area, including ZIP codes 92570, 92571, 92572, and 92599, and we regularly run calls into Good Hope, Mead Valley, and Meadowbrook. The whole Perris Valley is in our service area.
If your gate is dragging, sagging, or just not closing right, call Kensington Gate Repair at (833) 320-4513. We’ll talk through what you’re seeing, give you a straight answer on whether it is worth fixing, and quote a free estimate before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Perris Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Diego Castillo"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Rosa Delgado"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Gilbert Torres