Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Claremont
Electric gate repair in Claremont typically runs $180 – $520 for most operator and hardware fixes, with control board replacements landing between $350 – $700. Most repairs are completed in a single visit. We know Claremont’s gates better than most because we see the same problems repeat across the city’s older neighborhoods every season.
If your gate is stuck open, grinding, or refusing to respond to the keypad, call (833) 320-4513. We’ll send an electric gate specialist to your Claremont property, diagnose the actual fault, and quote a price before any work begins. No guessing, no “try this and see,” no pressure to replace something that can be repaired.
We serve all of Claremont’s 91711 zip code, from the Craftsman homes near Memorial Park to the Spanish Colonials off Indian Hill Boulevard and the mid-century properties north of Foothill. When a gate stops working, you don’t want a generalist who might get to it between other jobs. You want someone who works on automated gates every day and has already seen your exact problem this week.
Why Kensington Gate Repair Is Claremont’s Preferred Electric Gate Repair Company
Claremont homeowners and property managers call us because electric gate repair is our entire trade. We’re not handymen who occasionally swap a sensor. We’re gate specialists led by Allen Prescott, and every diagnostic call, every parts order, and every repair we make across Claremont is done by someone whose only job is gates.
We work on virtually every major gate brand, which matters more in Claremont than most places. The city’s older housing stock means gates were often built by one company, then retrofitted with an opener from another, then patched again over the decades. A technician locked into one ecosystem will recommend replacing whatever doesn’t match their catalog. We diagnose what’s actually there and repair around it.
Response time to Claremont is short. Our shop in Montclair is ten minutes from the Claremont Village, and we route calls directly to technicians instead of through a call center. When a gate fails in a shared driveway off College Avenue or a hillside property above Baseline Road, you need it working again, not a callback in three days.
Styles & brands we work with
Gate Access Control in Claremont
Gate access control in Claremont means more than just the operator: it’s the keypad, intercom, vehicle loop detector, safety photocells, and any card reader or phone-based entry system your gate uses to decide who gets through and who doesn’t. On older Claremont properties, these systems are frequently layered: an original LiftMaster operator paired with a newer keypad, or a FAAC motor wired to a loop detector installed twenty years ago. We diagnose the whole chain, not just the first component that fails.
Keypads, Intercoms, and Entry Systems
Claremont gates near the Village and the colleges often use shared access for multiple vehicles or pedestrians. When a keypad stops transmitting or an intercom buzzes but won’t release the gate, the issue is usually wiring degradation or outdated hardware, not the operator itself. We test the signal path end to end and replace only what’s failed. A keypad replacement in Claremont typically runs $180 – $320 including parts and programming.
Vehicle Loop Detectors and Safety Photocells
If your gate opens for some cars but not others, or reverses for no reason, the problem is often the loop detector buried in the driveway or a photocell knocked out of alignment. Claremont’s mature oak and citrus roots shift driveways just enough to crack loop wires, and dropped limbs routinely nudge safety sensors offline. We repair loops, reset photocells, and retune the operator so the gate stops false-triggering.
Commercial Gate Operator in Claremont
A commercial gate operator in Claremont handles cycle counts that residential units were never designed for: apartment complexes off Foothill, church parking lots near the Colleges, medical offices along the 91711 corridor, and school campuses with constant vehicle flow. When these operators fail, access doesn’t just slow, it stops. We service and replace commercial operators from BFT, FAAC, and LiftMaster, and we keep minimum downtime as the priority on every commercial call.
Swing, Slide, and Barrier Arm Operators
Claremont commercial properties run a mix of configurations. Older apartment buildings often have swing gates on cramped lots, while larger complexes use slide gates or barrier arms. Each has different failure patterns. Swing operators strain against hinge wear and wind load. Slide operators clog with leaf debris and bind on bent track. Barrier arms fail at the motor coupling and the breakaway mechanism. We diagnose against the specific operator type, not a generic checklist.
Access Control Integration for Commercial Sites
Commercial gates in Claremont frequently tie into building access systems: key fobs, phone-based entry, visitor call buttons, and fire lane override requirements. When an operator is replaced, the new unit has to talk to the existing access hardware. We handle that integration on site, including the safety edges and entrapment protection required by California code for any automated commercial gate. A full commercial operator replacement with access integration typically runs $1,800 – $4,500 depending on operator class and gate length.
Trusted Brands We Service in Claremont
Your gate brand, our expertise. Kensington Gate Repair technicians are hands-on certified across nine major gate and operator brands, including LiftMaster, FAAC, BFT, and Linear, plus five others we see regularly in Claremont. That breadth matters here because Claremont gates are rarely single-brand installations. You’ve got an old Linear actuator on a retrofitted wrought-iron gate, or a Viking operator mated to a Ghost Controls keypad, or a BFT slide motor on a track installed in the 1990s. We repair all of it. And because we stock common Claremont parts in our Montclair shop, we’re not waiting a week for a control board or a limit switch to arrive.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Claremont Homes
- Root-heaved hinge posts on mature citrus and oak lots. Claremont’s older landscaping has big roots that push posts out of plumb. When a post heaves, the operator strains against misalignment, the loop detector misreads, and the gate eventually stops closing. We reset or replace the post before diagnosing the operator, otherwise the repair won’t last.
- Slide gates binding on clogged tracks. Tight shared driveways off College Avenue and around the Village leave no room for swing gates, so slide gates dominate. Citrus leaves, acorns, and dropped limbs pack the track and the rack and pinion, causing the gate to drag or reverse. Clearing and lubricating is routine, but bent track sections need replacement.
- Santa Ana wind-load stress on original hardware. The winds that sweep down from the San Gabriels hit old wrought-iron and wood gates hard, especially on Craftsman-era posts that were never engineered for automated operation. Hinges loosen, welds crack, and the operator can’t compensate for a sagging leaf. We rehang, reinforce, and retune to keep the gate plumb through wind season.
- Safety photocells knocked out of line by dropped limbs. When a limb falls on a shared driveway, it usually lands on the gate or the sensor. A misaligned photocell makes the gate refuse to close or reverse mid-cycle. The operator is usually fine. Clearing the path and re-aiming the sensor fixes most of these calls in under an hour.
Pricing for Electric Gate Repair in Claremont, CA
Most electric gate repairs in Claremont fall into clear ranges. A service call and diagnostic runs $75 – $120. Keypad or remote programming is $60 – $100. Photocell replacement runs $150 – $250. Limit switch or capacitor work is $120 – $220. Control board replacement on a LiftMaster or FAAC unit typically lands between $350 – $700. Full motor replacement on a slide operator runs $600 – $1,400. Commercial operator replacement starts at $1,800 and goes up with gate length and duty cycle. The price you’re quoted is the price you pay, agreed before we start. Call (833) 320-4513 for an exact quote, estimates are free.
We Also Serve Cities Near Claremont
Kensington Gate Repair is based in Montclair, so Claremont calls get a ten-minute response. We also cover Electric Gate Repair in La Verne, Upland, and San Antonio Heights, plus the surrounding communities. If your gate is down anywhere in the Inland Empire foothills, our Claremont service area is one call away. Reach us at (833) 320-4513.
Serving Claremont, CA — Our Local Coverage Area
We’re based in the Claremont area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Claremont
Yes. We repair shared-right-of-way gates in Claremont without closing access to either household unless the gate physically cannot move. On a recent College Avenue property, we kept a LiftMaster slide gate partially operational for both neighbors while we reset a root-heaved post and retuned the operator. We stage the work so vehicles and pedestrians keep moving, and we tell you exactly when the gate will be down and for how long. Call (833) 320-4513 to schedule a repair that respects the right of way.
Slide gates jam because the track is fouled, the rack and pinion is clogged, or the gate is out of plumb, not because the gate type is wrong. In Claremont, citrus leaves and oak debris pack tracks constantly, and root movement shifts the gate off its wheels. The gate may have been a slide originally because the driveway slope or the property line configuration made a swing gate impractical. We clean, straighten, and realign before recommending anything more expensive. For slide gate repair in Claremont, call (833) 320-4513.
Yes, in most cases. Claremont’s historic wrought-iron gates are usually worth preserving, and the operator is a separate component from the gate itself. We repair or replace the operator, the control board, the limit switches, or the wiring, and we leave the original gate intact. If the hinge post has failed, we reset or reinforce it. We don’t push replacing a century-old gate that can be restored. Call (833) 320-4513 for an assessment on your original gate.
Yes. California requires entrapment protection on automated gates: photocells, safety edges, or both, depending on the gate type and operator class. Many older Claremont gates predate these requirements and have no protection at all, which is both a code violation and a genuine safety hazard, especially for children and pets. We retrofit entrapment protection onto existing operators whenever we repair a gate that lacks it. Call (833) 320-4513 to check whether your Claremont gate is compliant.
Usually a repair. Santa Ana winds stress hinges, lag bolts, and welds on older posts, especially the original Craftsman-era wood posts common in Claremont’s historic core. We reinforce the post, rehang the gate, and retune the operator to handle the wind load. Replacement is only needed when the post itself has rotted or split through, which we can assess in one visit. Call (833) 320-4513 for a wind-proofing repair before the next Santa Ana cycle.
Written by Allen Prescott, Owner at Kensington Gate Repair, serving Claremont since opening our Montclair shop.