Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Costa Mesa
Electric gate repair in Costa Mesa typically runs $150 to $450 for most operator, hinge, and control board fixes, with full motor replacements landing between $600 and $1,400 depending on the operator brand and gate size. We get to Costa Mesa fast and the diagnosis is the important part: a rusted hinge post on the Westside needs a very different fix than a failed keypad in South Coast Metro. Call (833) 320-4513 and you will speak directly to a gate specialist, not a dispatcher reading from a script.
Why Kensington Gate Repair Is Costa Mesa’s Preferred Electric Gate Repair Company
We work on gates in Costa Mesa every week, and the city throws a specific mix of problems at us: corroded vintage iron on the Westside, aging operators and access-control electronics in 92626, and everything in between. Our technicians are dedicated gate specialists, not general contractors squeezing gate calls between plumbing jobs. That matters when your FAAC operator from 1998 finally gives out and the next person you call has never opened a control board housing. Owner Allen Prescott built Kensington around one trade, and it shows in how fast we find the actual fault.
Costa Mesa customers get a real specialist who knows that a gate post shifting in a shallow 1950s footing is often the root cause of a “broken” gate panel. We quote the repair before any work begins. The number you get on the phone or in person is the number on the invoice, full stop.
Styles & brands we work with
Automatic Gate Repair in Costa Mesa
Automatic gate repair in Costa Mesa means diagnosing and fixing the motor, control board, safety sensors, keypad, and the mechanical hardware that carries the gate itself. In 92626, most automatic gate failures are electronic: a discontinued control board, a dead keypad, a failed loop detector. On the Westside, the failure is usually mechanical first, electronic second.
Retrofitting Older Operators for Modern Safety
Many Costa Mesa gates were installed before UL 325 entrapment-protection requirements. If your older operator still runs but lacks photocells or an auto-reverse, retrofitting is often a few hundred dollars, not a whole new system. We fit safety photocells, edge sensors, and updated control boards onto legacy tracks. When the operator is too obsolete to retrofit safely, we will tell you straight: replacement will cost less than patching it every year.
Keypad, Loop, and Access Hardware
A failed keypad in an HOA entry gate takes the whole community offline. We diagnose whether it is the keypad itself, the wiring run, or the control board refusing the input. Loop-detector failures are common at South Coast Metro commercial entries where the saw-cut loop in the asphalt degrades. We fix all of it on site.
Electric Gate Motor in Costa Mesa
Electric gate motor replacement in Costa Mesa ranges from $600 to $1,400 installed depending on the operator and the gate’s weight, with most residential motor-only jobs landing between $550 and $900. Motor failures show up differently: a gate that hums but won’t move, opens halfway and stops, or trips its breaker. We carry motors and parts for LiftMaster, FAAC, BFT, and Linear, so most replacements happen on the first visit.
When a Motor Can Be Repaired
Not every dead motor is dead. Blown capacitors, failed start relays, and burned limit switches on a LiftMaster or FAAC unit can often be replaced for under $200. We open the unit, bench-test the motor itself, and only quote replacement when the windings and gearbox are genuinely done.
Replacing a Motor on an Older Gate
If you have a 1990s-era FAAC or BFT operator in an Eastside community, the motor may still be fine while the control board is obsolete. We check both. Replacing a motor on a gate that has bad hinges is wasted money; we tell you when the hardware underneath has to be fixed first.
Trusted Brands We Service in Costa Mesa
We work on virtually every major gate brand installed across Costa Mesa. LiftMaster and FAAC show up constantly in 92626 HOA and commercial installations, while BFT and Linear appear on older residential systems. Because we are brand-agnostic, our recommendation is based on what fits your gate and your budget, not on what we happen to stock. Our technicians carry the common boards, motors, and receiver parts for these brands in the truck, which means fewer two-trip repairs for Costa Mesa customers. Electric Gate Repair is a technical specialty, and we keep it that way.
Common Electric Gate Repair Problems We See in Costa Mesa Homes
- Rust-welded hinges on Westside wrought-iron gates. Marine-layer salt air in 92627 seizes original hinges solid within a decade or two. The gate will not swing, not because the panel is broken, but because the hinge barrels have corroded into one piece.
- Sagging gates from shallow hinge posts. Many 1950s Costa Mesa bungalows had gate posts set in footings only 12 to 18 inches deep. Decades of swing load shift the post; the gate drags on the driveway and the hinges bind.
- Obsolete control boards in 92626 HOA and commercial gates. South Coast Metro communities built in the 1990s often run LiftMaster or FAAC boards that are now discontinued. One failed relay or keypad input takes the entire entry offline.
- Dead keypads and loop sensors on community entries. Costa Mesa’s apartment and HOA gates cycle hundreds of times a day. Keypad membranes crack, loop detectors fail in the asphalt, and the gate defaults to “open” or “dead.”
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Costa Mesa, CA
Here are the Costa Mesa prices we quote most often, in real dollars. Hinge replacement on a standard swing gate runs $180 to $340, including new bearing hinges and realignment. Control board replacement for a LiftMaster or FAAC operator is $250 to $500 for the board plus $100 to $150 labor. Keypad replacement averages $150 to $260 installed and programmed. A full electric swing-gate motor replacememt runs $600 to $1,400. The price you get before we start is the price you pay, and the estimate is free. Call (833) 320-4513 for an exact quote on your gate, in your Costa Mesa neighborhood.
We Also Serve Cities Near Costa Mesa
If your gate is in Newport Beach, Fountain Valley, Huntington Beach, or San Joaquin Hills, the same specialist teams covers you. Our Electric Gate Repair in Costa Mesa service area extends across the surrounding coastal and inland communities, so one call covers your home or a property you manage.
Serving Costa Mesa, CA — Our Local Coverage Area
We’re based in the Costa Mesa area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Costa Mesa
Almost always, that gate can be repaired. The rust is in the hinges and latch hardware, not the iron panel itself. We cut out the seized hinges, install new bearing hinges, reset the post if it has shifted, and the gate swings like it has not since the 1960s. Call (833) 320-4513 and we will give you a straight answer after looking at it.
Yes, in most cases. If the motor and gearbox are sound, we add photoelectric sensors, an auto-reverse edge, and a compliant control board for a few hundred dollars. Some 1990s operators cannot be safely retrofitted; we will tell you that directly and quote replacement rather than let you run a gate without UL 325 protection.
Discontinued control boards. These communities were built with LiftMaster or FAAC operators whose boards are now years out of production. A failed board or relay kills the whole entry. We stock aftermarket and remaining OEM boards for most of those models and usually restore operation the same visit. Call (833) 320-4513 for a diagnosis.
Usually just an adjustment plus a hinge or post repair. In Costa Mesa’s older homes, the culprit is almost always the hinge post shifting in its original shallow footing, or original hinges wearing out. We reset the post, install new hinges, and realign the panel. Replacement is only the right answer if the panel itself is rusted through or broken, which is rare.
Yes. We service solar gate openers and work on FAAC and BFT equipment daily, including the older 1990s and early 2000s models common in Costa Mesa. The solar panel and battery are usually the first things to test, and we stock replacement batteries and troubleshooting boards for these units. Call (833) 320-4513 for an exact repair quote.
Contact Kensington Gate Repair for Electric Gate Repair in Costa Mesa
Whether you need a rusted Westside hinge cut out, a control board replaced in a 92626 HOA entry, or a full operator retrofit with modern safety edges and photocells, call Kensington Gate Repair. We quote the repair before any work starts, and the estimate is free. Reach Allen Prescott and the team at (833) 320-4513.
Written by Allen Prescott, Owner at Kensington Gate Repair, serving Costa Mesa and surrounding communities.