Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Corona, CA
Corona gate jobs split into two worlds: 1950s-era wrought-iron driveway gates on the older west side, and HOA-governed automated sliding gates in the tract communities south of the 91. Kensington Gate Repair handles both. We install, repair, and replace every type of gate system in Corona, and we work on virtually every major gate brand: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your existing gate is failing or you’re planning a new installation, call us at (833) 320-4513 for a free estimate.
Why Corona Homes Are Different
Corona sits in a hot, dry inland basin where summer temperatures regularly climb past 100 degrees. That heat bakes gate-mounted keypads, control boards, and rubber seals on south- and west-facing gates, which is why we replace more sun-damaged keypads and warped limit switches here than almost anywhere else in the Inland Empire. Then the Santa Ana winds arrive in the fall. A 60 mph gust against a wide tube-steel driveway gate puts enormous torque on the hinge posts and the operator arm, and we regularly see gates that have been racked just enough to bind against the latch or drag on the concrete.
The housing stock compounds this. Corona’s core ZIP codes (92879, 92882) are full of 1950s through 1980s single-family homes with original or second-generation wrought-iron pedestrian gates. Those gates are heavy, and many sit on hinges that haven’t been serviced in thirty years. The newer south and east neighborhoods (92881, 92883) are different: automated sliding and swing gates on smaller lots, often controlled by operators that were builder-grade from the start and are now failing. And in the HOA-heavy master-planned communities, a gate repair can require architectural-committee approval before any work starts. We know how that process works and which document to submit.
Styles & brands we work with
Our Main Corona Services
Most Corona calls come down to two things: a gate that won’t open, and the electric operator that stopped working. Here’s how we handle both.
Gate Repair in Corona
A sagging wrought-iron gate in the older parts of Corona is rarely just a hinge problem. Years of Santa Ana wind loading and occasional winter rain have usually pulled the post or stretched the hinges, and fixing it properly means addressing the frame geometry, not just slapping on a new hinge and calling it done. We diagnose the full gate system: posts, hinges, frame alignment, latch and lock, and the operator if one is mounted. Then we repair it so it closes square and stays that way. If you have a gate that’s dragging, binding, or won’t latch, see our dedicated Gate Repair in Corona page for detailed pricing and symptoms.
Electric Gate Repair in Corona
Electric gates fail in predictable ways in Corona: sun-cooked circuit boards, keypads with cracked membranes, loop detectors that stop sensing the car, and motors that burn out from pushing against a misaligned gate. We carry parts for FAAC, BFT, Linear, Viking, and the other major brands, and we diagnose the operator, the loops, the safety edges, and the power run before we replace anything. That means fewer wasted trips and a repair that actually holds. For operator-specific symptoms and costs, see our Electric Gate Repair in Corona page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Corona
Gate installation in Corona almost always means one of two jobs: replacing a tired 1970s wrought-iron gate on an older west-side home, or installing a new automated sliding gate in a newer east-side community where the HOA has specific rules about what gets approved. The heat, wind, and occasional heavy rain in this basin mean we spec thicker posts, better drainage at the base, and operators rated for duty cycles that exceed what a builder put in.
We handle the full Gate Installation scope: the gate itself, the posts, the operator, the power run, safety edges, loops, and programming. One call covers everything from site measurement to final testing.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open the gate, or you’ve just moved in and want secure, controlled access without an awkward manual chain.
What it costs in Corona
Automatic gate installation in Corona typically runs $6,000 to $10,000 complete, depending on gate width, operator type, and power distance.
How we do it
We measure the opening, set the posts, hang the gate, mount and wire the operator, install the safety edges and loops, then program remotes and keypads and run a full cycle test.
Driveway Gate Installation
Signs you need it
The existing driveway gate is rusted through at the bottom rail, the posts are leaning, or the design no longer matches the house and you want a clean replacement.
What it costs in Corona
Expect $3,500 to $7,000 for a new driveway gate in Corona, with the higher end covering custom fabrication and automation.
How we do it
We pull the old gate, set new posts in concrete, hang the new gate with a level frame, and if you want automation we add the operator and safety system in the same visit sequence.
What Gate Installation Costs in Corona
| Item | Typical range in Corona |
|---|---|
| Automatic gate installation | $6,000 – $10,000 |
| Driveway gate installation | $3,500 – $7,000 |
| Wrought-iron gate replacement | $2,500 – $5,000 |
Does a new gate installation in Corona require HOA approval?
Often yes, especially in the master-planned communities south of the 91 and in newer east-side subdivisions. Submit a photo of the proposed gate and the spec sheet to your architectural committee before we order materials, and we’ll help you put the technical details together.
How long does a typical driveway gate installation take in Corona?
Most installations finish in one to two days once the gate is fabricated. Custom wrought-iron work adds fabrication lead time, usually two to four weeks depending on the shop. We confirm the full schedule at the quote stage.
Brands We Service in Corona
We service FAAC, BFT, Linear, and Viking operators in Corona, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we work across competing manufacturers, our diagnostics are brand-agnostic: we recommend the part or replacement that fits your system and your budget, not whichever brand we happen to have the most of on the shelf. Parts for the most common Corona failures are stocked locally and can usually be on your gate within a day or two. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Corona, CA
| Service | Typical range in Corona |
|---|---|
| Pedestrian gate repair | $150 – $500 |
| Driveway gate repair | $250 – $900 |
| Gate hinge replacement | $180 – $400 |
| Gate wheel replacement | $180 – $350 |
| Gate lock replacement | $150 – $350 |
| Automatic gate operator repair | $350 – $1,700 |
| Gate operator replacement | $1,200 – $3,500 |
| Electric gate repair | $300 – $1,500 |
| Keypad, intercom, and loop repair | $200 – $800 |
| Automatic gate installation | $6,000 – $10,000 |
| Driveway gate installation | $3,500 – $7,000 |
| Wrought-iron pedestrian gate replacement | $2,500 – $5,000 |
Two things push prices up in Corona more than anywhere else nearby: sloped lots that require custom post depths and drainage work, and HOA communities that demand specific materials or finishes. Whatever the job, we quote the full price before any work starts, and that price is the price. No surprises on the invoice.
Neighborhoods We Serve in Corona
Our service area covers the full span of Corona, from the older 1950s-era tract neighborhoods of central Corona up to the newer subdivisions on Temescal Valley Road and Eagle Glen. We routinely work in:
- Eagle Glen
- Dos Lagos
- South Corona
- Corona Hills
- Chase Ranch
Most Corona jobs have a technician on-site within one to three business days, depending on the season and parts availability.
Service Area – Cities Near Corona
We also cover the communities directly around Corona, including Home Gardens, CA to the north, El Cerrito Corona, CA on the other side of the 15, Eastvale, CA to the east, and Norco, CA just up the 15. If your gate is somewhere in this corridor, call and we’ll let you know exactly when we can get there.
Serving Corona, CA — Our Local Coverage Area
We’re based in the Corona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Corona
Most non-urgent repairs in Corona are scheduled within one to three business days. We prioritize safety issues like a gate that won’t close or an operator that keeps cycling on its own, and we’ll tell you the earliest available window when you call.
In most cases, replacing an existing gate on the same posts doesn’t need a city permit. If the job involves moving the property line, adding a new post at the curb, or working inside an HOA, additional approvals may apply and we’ll help you determine what’s needed before work starts.
Yes. We work on residential driveway and pedestrian gates as well as commercial sliding gates, parking lot operators, and access-control systems. The equipment changes but the diagnosis and repair process stays the same.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Corona Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Marisol Hernandez"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Eduardo Garcia