Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Bloomington, CA
Gate installation in Bloomington usually means replacing a sun-baked, sagging driveway gate on a mid-century lot, or adding a new automatic opener to an existing chain-link or wrought-iron gate that was never built for one. Most of the 92316 grid sits on sandy alluvial soil, so posts set decades ago have often shifted. That changes how we measure, how we set new posts, and how we choose hardware. Kensington Gate Repair has served Bloomington since 2011, and we work on virtually every major gate brand. Call (833) 320-4513 for a free estimate on any gate job.
Why Bloomington Homes Are Different
Bloomington is unincorporated San Bernardino County territory, not a city with its own permit desk. That means gate and fence work follows county setback and height rules, and most older driveway gates sit on posts set shallow in soil that shifts after rain and heat cycles. We see the result constantly: gates that drag on the concrete because the post has leaned, gates that bind at the latch because the frame has twisted, and rollers that have ground flat because the track is no longer square.
The housing stock here is predominantly 1950s to 1970s single-story stucco homes on generous lots. Front-yard RV access is common, which means wider driveway gates than you see in newer subdivisions. Chain-link and wrought-iron are the standard materials. Most gates in Bloomington are manually operated, though operators from LiftMaster, Mighty Mule, and DoorKing are becoming more common as homeowners add automation to existing gates. Inland Empire heat bakes paint and causes wood to crack, while Santa Ana winds torque rollers and stress weld points. Winter rains rust exposed steel and soften the ground around posts. Every one of those failure modes is familiar to us, because it repeats across the 92316 grid in predictable patterns.
Styles & brands we work with
Our Main Bloomington Services
Most Bloomington homeowners call us for one of two reasons: a gate that has stopped working, or an automated gate that has stopped responding. The two services below are the ones our dispatchers book most often in the 92316 area.
Gate Repair in Bloomington
A sagging hinge, a latch that no longer catches, a wheel that has chewed through its bracket. These are the calls we take most after the winds have blown through or a winter rain has softened the soil. In Bloomington, repair often means correcting what the shifting ground and heat have done to the frame over decades, not just swapping a part. We diagnose the whole gate and frame, not just the symptom. For a closer look at the repair process, see our dedicated Gate Repair in Bloomington page.
Electric Gate Repair in Bloomington
When an automated gate in Bloomington stops opening, the cause is almost always one of a handful of things: a dead battery, a control board that has failed from heat exposure, a photo eye that has been knocked out of alignment, or a loop detector that has stopped sensing the vehicle. Our electric gate specialists work on operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We diagnose the operator, the board, and the safety sensors together. Details on the electric repair side are on our Electric Gate Repair in Bloomington page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Bloomington
New gate installation in Bloomington is rarely a simple swap. On a 1960s or 1970s lot, the old gate usually hangs from posts that have leaned or shifted in the sandy alluvial soil that runs under much of the 92316 area. A proper installation means setting posts deep enough to resist both Santa Ana wind gusts and the slow creep of saturated ground after winter rain, then hanging a gate that stays square through the heat cycles this part of the Inland Empire is known for. We measure every job as if the ground will move, because in Bloomington it usually has. You can find the full scope of our Gate Installation work on our service hub page.
Automatic Gate Installation
Signs you need it
You are opening and closing a heavy driveway gate by hand multiple times a day, or you want controlled access to your property without running new wiring from the house.
What it costs in Bloomington
A new automatic gate opener and installation in Bloomington typically runs between $1,500 and $4,500 depending on the operator brand, gate size, and whether a power run is needed.
How we do it
We measure the gate’s weight, length, and swing or slide path, set or reinforce the posts, mount the operator, run power from the nearest source, and program remotes, keypads, and safety edges before testing the full cycle.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through, sagging past the point of adjustment, or no longer matches the security level you want at the front of your property.
What it costs in Bloomington
A new manual driveway gate in Bloomington generally costs between $1,200 and $3,500, including new posts and hardware, while an automated driveway gate starts closer to $3,000.
How we do it
We demo the old gate, dig and set new posts below the frost and wind-shift line, pour concrete with proper drainage, hang the new gate, and adjust the hardware until the gate swings clean and latches without binding.
Sliding Gate Installation
Signs you need it
Your driveway slopes or curves in a way that makes a swing gate impractical, or you are on a narrow lot where a cantilever slide is the only gate that will clear the vehicle path.
What it costs in Bloomington
A sliding gate installation in Bloomington typically runs between $2,200 and $6,000, with the upper range covering wider openings and automated cantilever or track systems.
How we do it
We set the track or cantilever carriage, pour the concrete pad to the correct depth and slope, hang the gate panel, install the stop and catch posts, and align the rollers so the gate travels without wobble.
What Gate Installation Costs in Bloomington
| Item | Typical range in Bloomington |
|---|---|
| Manual driveway gate, new posts and hardware | $1,200 – $3,500 |
| Automated driveway gate, opener and install | $1,500 – $4,500 |
| Sliding gate installation | $2,200 – $6,000 |
Do I need a permit to install a gate in Bloomington?
Bloomington is unincorporated San Bernardino County, so there is no city permit desk, but county setback and height rules still apply. Most standard driveway gate replacements do not require a county permit, but we always confirm the specifics before work starts. Call (833) 320-4513 and we will check your lot’s status as part of the estimate.
How long does a gate installation in Bloomington take?
Most driveway gate installations take one full day, including post setting and concrete. Automated gates may take a second day for the electrical run, operator programming, and safety sensor alignment. We schedule the full scope at the time of the estimate, so you are not left with a half-finished gate overnight unless the concrete needs to cure.
Brands We Service in Bloomington
We work on virtually every major gate brand, and the ones we see most in Bloomington are LiftMaster, Mighty Mule, DoorKing, and Elite. Because we are a dedicated gate company rather than a general contractor, our trucks carry the boards, arms, sensors, and hardware for these systems locally. That means a diagnosis on a Bloomington driveway usually ends with the fix the same day. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Bloomington, CA
| Service | Typical range in Bloomington |
|---|---|
| Gate hinge replacement or realignment | $180 – $450 |
| Gate frame or post straightening | $250 – $600 |
| Gate roller or wheel replacement | $150 – $400 |
| Manual gate latch or lock replacement | $120 – $300 |
| Automatic gate opener troubleshooting and repair | $250 – $750 |
| Control board replacement | $350 – $900 |
| Photo eye or loop detector replacement | $200 – $500 |
| Manual driveway gate installation | $1,200 – $3,500 |
| Automatic gate opener installation | $1,500 – $4,500 |
| Sliding gate installation | $2,200 – $6,000 |
What pushes a Bloomington gate job toward the upper end of these ranges is the condition of the ground. Posts set shallow in sandy alluvial soil often need to be re-dug and re-set, and gates that have been leaning for years have usually damaged their own hardware along the way. Whatever the final number, we quote the full price and agree on it before any work starts. You will not get a surprise invoice after the gate is hung.
Neighborhoods We Serve in Bloomington
We cover the full 92316 ZIP code, from the older lots along Valley Boulevard and Slover Avenue down to the residential streets branching off Cedar and Linden. Our response time across the Bloomington area is typically same day or next morning for repair calls, and we schedule installations around the concrete cure time that an Inland Empire heat week demands.
- Valley Boulevard corridor south of the 10
- Slover Avenue residential streets
- Cedar and Linden Avenue lots
- Jurupa Avenue corridor
- North Bloomington near Santa Ana Avenue
Service Area – Cities Near Bloomington
Kensington Gate Repair works across the western Inland Empire, and many of our Bloomington customers ask us to handle gates on properties they manage nearby. We serve Fontana, CA directly to the northwest, Rialto, CA to the north, Glen Avon, CA to the southwest, and Pedley, CA to the south. If you own or manage property in any of these areas, the same team covers it.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Bloomington
Most repair calls in the 92316 area get same-day or next-morning service. A gate stuck open on a Bloomington property is a security problem, so we treat those calls as priority. The dispatcher will tell you the exact window when you call (833) 320-4513.
Because Bloomington is unincorporated San Bernardino County, there is no city permit desk, but county setback and height standards still apply. A standard driveway gate replacement on the same footprint rarely needs approval. For anything that changes the location or height, we will confirm the county requirement before we schedule the work.
Yes. We work on residential driveway gates, perimeter gates on larger lots, and commercial gates for Bloomington businesses and industrial properties with access control systems. The same brand-agnostic diagnostic approach applies to all of them. Call (833) 320-4513 and describe what the gate is doing, and we will tell you whether it needs a repair or a full replacement.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bloomington Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Eduardo Garcia"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Diego Castillo"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Rosa Delgado