Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Ontario
If your electric gate is grinding, sagging, reversing mid-travel, or dead at the keypad in Ontario, you need a gate specialist, not a general handyman. Kensington Gate Repair works on automated gate systems every day. We know LiftMaster, FAAC, BFT, and Linear operators inside out, and we know the specific ways Ontario’s wind and soil punish gate hardware. Call (833) 320-4513 and you’ll reach a real gate technician who can diagnose the problem and schedule repair, often before the week is out.
We’re based in Montclair, which puts our trucks minutes from Ontario’s neighborhoods, business parks, and the older ranch tracts south of the 10. No call-center triage. No “maybe we know someone.” Just gate repair, electric gate repair, and gate installation handled by specialists.
Why Kensington Gate Repair Is Ontario’s Preferred Electric Gate Repair Company
Ontario property owners call us because gates are all we do. Our team led by Allen Prescott works on virtually every major gate brand, which means we’re not locked into one manufacturer’s way of doing things. If your LiftMaster operator is binding on a racked gate, we fix the gate and the operator. If your FAAC control board is throwing a fault code, we trace it to the actual trigger, not just the symptom. That’s the difference between a repair that holds and one that fails again in six months.
We understand Ontario’s housing stock because we work in it constantly. The post-WWII and 1960s-1980s single-story ranch tracts in central and south Ontario have original wood and chain-link fences with driveway gates whose hinge posts were often set directly in soil, never in concrete. Add Ontario’s hot, dry summers and the Santa Ana winds that funnel down the Cajon Pass corridor, and you get gate failures that are predictable. We’ve seen the pattern enough times that we can usually tell you what’s wrong from a phone description of the symptom. That local knowledge means fewer wasted trips and faster repairs.
Our Electric Gate Repair team covers everything from motor replacement and control board repair to full gate access control upgrades. We’re not a generalist service that squeezes gates in between faucet repairs and drywall patches. Gates are the entire job, every day.
Styles & brands we work with
Gate Access Control in Ontario
Gate access control in Ontario means giving the right people reliable entry, and keeping everyone else out. For a homeowner, that usually means a keypad, a remote, or a smartphone-connected controller tied to the gate operator. For an HOA or commercial property, it means intercom panels, vehicle detection loops, card readers, or telephone-entry systems integrated with the operator’s control board.
Ontario’s older neighborhoods are filled with gates that have never been upgraded since they were installed. Many have no access control at all beyond a physical key, or they have a single remote that’s been taped back together twice. Installing a modern keypad or remote receiver changes how the whole property works. The job involves mounting the access device, wiring it to the operator’s control board, programming entry codes or fobs, and testing the full cycle so the gate opens, holds, and closes safely without slamming on a vehicle.
When we upgrade access control on an Ontario property, we check the gate itself first. If the gate is sagging and the hinges are loose, adding a keypad is pointless. The gate has to travel smoothly, or the operator will keep tripping its safety sensors. We fix the mechanical problem before we wire in the electronics. That sequencing saves you from paying for two repair visits.
Keypad entry systems in Ontario typically run $350 to $800 installed, depending on whether we’re wiring a new keypad to an existing operator or adding a telephone-entry system for a multi-tenant property. A basic remote receiver replacement runs $180 to $300. We quote the exact price before any work starts, and the number we agree on is the number you pay.
Keypad and Remote Entry
We install and program keypads from the same manufacturers whose operators we service. If your gate runs a LiftMaster operator, we’ll recommend a keypad that talks to it natively rather than a universal unit that adds failure points. Programming is done on site, tested repeatedly, and you get a walkthrough of how to add or delete codes yourself.
Intercom and Telephone-Entry Systems
For multi-unit properties and commercial gates in Ontario, intercom panels and telephone-entry boxes are the access control workhorses. We replace aging panels that no longer ring through to residents, rewire voice circuits, and tie the entry system into the gate operator so a single button press opens the gate. If your building’s got a directory panel from the 1980s that tenants complain about, we can swap it for a modern wired or cellular unit without replacing the entire gate system.
Commercial Gate Operator in Ontario
A commercial gate operator in Ontario is a different animal from a residential unit. Commercial operators cycle hundreds of times a day, every day, on gates that weigh thousands of pounds. They run on 120V or 220V power, they often integrate with traffic spikes, safety loops, and access control panels, and they’re subject to stricter code requirements around entrapment protection.
Ontario’s commercial corridors are dense: warehouses and distribution centers along the 10 and 60 corridors, business parks off Haven and Archibald, truck yards and industrial complexes near the airport. Every one of those properties relies on a gate operator that has to work, every single cycle, or business stalls. When a commercial operator fails, it’s not a convenience problem. It’s a backed-up truck line and an angry tenant.
We service commercial gate operators from LiftMaster, FAAC, BFT, and Linear, among others. Repairs on commercial units typically involve diagnosing the motor, control board, loop detectors, or safety photocells, then replacing the failed component. Because we work across brands, we don’t push a particular manufacturer on you. If your BFT operator has a failing capacitor and the rest of the unit is solid, we replace the capacitor. If the operator is fifteen years old and repeatedly down, we’ll tell you honestly whether repair or replacement is the smarter spend.
Commercial gate operator repair in Ontario runs $450 to $1,800 depending on the component and the operator’s size. A full commercial operator replacement typically runs $2,500 to $6,500 installed, including removal of the old unit, new mounting, electrical connection, and safety loop integration. We quote every job before starting, and you approve the number before we touch a tool.
Loop Detector and Safety Sensor Repair
Vehicle detection loops buried in the pavement fail when the wire breaks or the detector board dies. The symptom is a gate that won’t open when a car pulls up, or a gate that closes on a vehicle because the loop didn’t sense it. We diagnose loop faults with an inductance meter, locate the break, and splice or replace the loop. If the sensor photocells are the culprit, we align, clean, or replace them so the gate stops reversing for no apparent reason.
Operator Replacement and Retrofit
Sometimes the operator is beyond saving. We handle full commercial operator retrofit, including pad-mount and pedestal-mount units. We size the operator to the gate’s actual weight and cycle rate, not to whatever was there before. A gate that’s grown heavier over years of repairs needs a different operator than the original spec called for. We verify that, install the correct unit, and program the limits and safety features so the gate runs clean from day one.
Trusted Brands We Service in Ontario
One call covers repair and installation, and one team knows your system: Kensington Gate Repair services electric and automated gates from LiftMaster, FAAC, BFT, and Linear, plus five other major manufacturers. That breadth matters because Ontario properties run every kind of operator. A 1960s ranch gate might have an ancient chain-drive unit someone wired up in the 1990s. A new build off Euclid might have a modern LiftMaster with internet connectivity. We service both confidently, and because we work across competing brands, our recommendations are driven by what fits your gate, not by what we have on the truck.
Brand-agnostic diagnostics mean we do not upsell you into a new operator just because we carry that brand. If a FAAC board is repairable, we’ll tell you. If a Linear arm is beyond saving, we’ll show you the worn gears and explain the repair path. Honesty is the whole service model.
Common Electric Gate Repair Problems We See in Ontario Homes
Ontario’s climate and housing age produce a predictable set of gate failures. Here’s what we most often repair in this city:
- Wind-fatigue racking on solid infill gates. Santa Ana winds blast down the Cajon Pass corridor and hit Ontario hard. Repeated gusts twist the top rail of solid-panel gates, racking the frame until the panel drops on its hinges. The gate drags, the operator strains, and eventually something breaks.
- Hinge posts set directly in soil. Many 1960s-era gates hang off wood posts that were never set in concrete. Hot, dry summers shrink the soil. Winter rains saturate it. The post loosens, the gate sags, and the whole system goes out of alignment.
- Operators that bind or reverse mid-travel. A sagging gate overloads the operator’s rack and pinion. The motor draws more current, the safety photocell trips, and the gate reverses or stops halfway. The operator isn’t broken. The gate that’s hanging on it is. We fix both.
- Failed safety sensors and loop detectors. Ontario’s dusty, windy conditions coat photocells with grime and pummel buried loop wires with vibration and temperature swings. The gate stops closing, or refuses to open when a car pulls up, because the sensor can’t see straight.
After a Santa Ana wind advisory, drive gates across older southside and central Ontario tracts tend to rack and drop on their hinges simultaneously. Our technicians get a cluster of calls the week after every wind event, and many of those gates are hanging off posts that were never set in concrete. If your gate pulled loose after the last blow, we’ll reset the post properly and re-hang the gate so it holds through the next one.
One recent job sticks in memory. After a February wind advisory, our crew handled a dual-swing gate on a 1960s ranch tract in south Ontario where both hinges had pulled loose from a wood hinge post that was never set in concrete. We reset the hinge post in a proper concrete footing, corrected the sag, and re-plumbed the LiftMaster operator so the gate opened smoothly again. That job wasn’t a patch. It was a fix that’ll outlast the original installation.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Ontario, CA
Electric gate repair in Ontario typically runs $150 to $600 for mechanical and electrical component repairs. Here’s the line-item breakdown we see most often:
- Keypad or remote receiver replacement: $180 to $350
- Safety photocell alignment or replacement: $120 to $300
- Control board repair or replacement: $250 to $700
- Hinge post reset (concrete footing): $350 to $900
- Gate motor or operator repair: $300 to $1,200
- Full gate access control upgrade: $350 to $800
- Commercial operator replacement: $2,500 to $6,500 installed
The final price depends on the gate’s age, operator type, and how far out of alignment the gate has drifted. We quote every job in writing before any work starts, so you approve the number. That price is the price. No surprise line items after the fact.
Call (833) 320-4513 for a free estimate, or to schedule a diagnosis. We answer directly, and we’ll tell you honestly whether the repair is worth the spend or the gate needs replacement.
We Also Serve Cities Near Ontario
Kensington Gate Repair is based in Montclair and works throughout the surrounding valley. We regularly serve Ontario neighborhoods and business districts, plus Upland, Chino, San Antonio Heights, and the Montclair area. If you’re anywhere in this part of San Bernardino County, we’re close enough for same-week scheduling and genuinely familiar with the gate failures your property is likely to develop.
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Ontario
Ontario sits directly in the Cajon Pass wind corridor, so Santa Ana winds hit this city harder than most of the Inland Empire. Solid infill gates catch wind like a sail. Repeated gusts rack the frame and loosen the hinge fasteners, and a gate that was already slightly sagging drops further. After every major wind advisory, we get calls from multiple south and central Ontario homeowners whose gates racked or dropped in the same storm. The repair usually involves re-plumbing the gate, resetting hinge posts, and re-tensioning the operator so the gate doesn’t bind. Call (833) 320-4513 if your gate is dragging after the last blow. We’ll get it squared away before the next one.
Every electric gate operator has a manual release mechanism, usually a keyed release or a pull handle on the operator itself. Turn the operator off first, then use the manual release to disengage the motor so the gate can swing or slide by hand. If the gate is a heavy commercial unit or a dual-swing set, get help before moving it. On some Ontario properties, you’ll find the manual release has seized because the gate hasn’t been moved by hand in years. That’s a sign the operator needs maintenance. If you can’t find or operate the release, call (833) 320-4513 and we’ll walk you through it or come out and do it safely.
The most common cause of a sagging electric gate in Ontario is a hinge post that was never set in concrete, compounded by years of wind and soil movement. The 1950s through 1980s ranch tracts that make up much of Ontario’s housing stock often have original wood or chain-link gates hung on posts set directly in dirt. Hot summers dry the soil, winter rain saturates it, and Santa Ana winds push the gate side to side. The post leans, the gate drops, and the operator starts straining. The fix is resetting the post in a proper concrete footing and re-hanging the gate level. Call (833) 320-4513 to schedule a diagnosis. We’ll show you exactly where the failure is.
Yes, it’s the gate’s safety system doing its job, and it’s usually reacting to a real problem. When a gate operator reverses or stops mid-travel, the most common causes are a sagging gate that overloads the motor, misaligned photocells, or a failing safety edge. On Ontario properties with wind-racked gates, the gate often sags just enough to trip the photocell beam as it travels. The operator isn’t necessarily broken, but running it in that condition wears out the motor and gears fast. We diagnose the mechanical alignment and the sensors, fix the underlying cause, and reset the operator. Call (833) 320-4513 and describe what the gate is doing. We can often give you a diagnosis over the phone and schedule the repair right then.
Yes. We upgrade manual and older electric gates to full keypad entry, remote access, and access control on residential and commercial properties across Ontario. The job starts with assessing the gate itself. If the gate is sagging or the operator is weak, we address that first so the new access hardware isn’t fighting a broken mechanical system. Then we install the keypad or access panel, wire it to the operator’s control board, and program your codes and remotes. Typical keypad installation in Ontario runs $350 to $800, and we quote the full number before starting. Call (833) 320-4513 to set up a free estimate.
Call Kensington Gate Repair for Electric Gate Repair in Ontario
If your gate is down, dragging, or making a noise it didn’t make last month, call us at (833) 320-4513. Kensington Gate Repair handles electric gate repair, gate access control, commercial gate operators, and full gate installation across Ontario, Upland, Chino, San Antonio Heights, and Montclair. We quote every job before the work starts, we service the major brands you actually have on your property, and our team led by Allen Prescott stands behind the diagnosis. One call covers repair and installation. Make it now.
Written by Allen Prescott, Owner at Kensington Gate Repair, serving Ontario and the surrounding valley.