Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Mentone, CA
Kensington Gate Repair handles gate installation in Mentone from the first measurement to the final opener programming, and we’ve been doing it here since 2011. Most Mentone jobs differ from what you’d see down the hill in Redlands: long gravel driveways, horse and ranch properties, pipe-rail and welded steel gates, and wind that never quite stops. Whether you need a new automatic driveway gate on a citrus-era parcel or a sliding gate for a rural-residential build, call (833) 320-4513 for a free estimate and a straight answer.
Why Mentone Homes Are Different
Mentone sits at roughly 1,600 feet in the Crafton-area foothills east of Redlands, a semi-rural pocket where citrus-era lots and newer custom homes share space with equestrian parcels. Driveways here are mostly dirt or gravel, not urban curb cuts, which changes gate work significantly. A gate on a long unpaved lane collects dust in its opener housing and hinge bearings in ways a city gate never does. Swing gates dominate, often welded steel or ranch-rail, and they take a beating from Santa Ana winds funneling through the Crafton Hills and East Mentone. Winter frost can crack welds and heave concrete gate pads on the shifting alluvial soils common to the area. The housing stock is a mix of mid-century homes on large unincorporated lots and newer rural-residential builds with detached shops, RV pads, and ornamental iron driveway gates. All of that means gate repair and installation here is not a generic job. It requires knowing how wind loads, dust, soil movement, and long driveway runs interact with the gate and opener.
Styles & brands we work with
Our Main Mentone Services
Most calls we take in Mentone fall into two categories: a gate that has stopped working correctly, or an electric gate that needs diagnosis and repair. Both are covered below.
Gate Repair in Mentone
When a mentone gate starts sagging, binding, or refusing to latch, it is usually a combination of wind fatigue, hinge wear, and post movement in sandy or shifting soil. We repair swing gates, slide gates, and manual gates of all types, replacing bent rollers, cracked welds, and seized hinges as needed. Mentone’s Santa Ana gusts bend slide-gate tracks on long rural driveways more often than anywhere else we work, and we check track straightness and post plumb on every call. For the full repair picture, see Gate Repair in Mentone.
Electric Gate Repair in Mentone
An automated gate that won’t open, opens halfway, or beeps without moving usually points to a control board, limit switch, or safety sensor fault. Mentone’s dust-filled openers on unpaved lanes are the most common seasonal service call we see, because fine grit works into gear assemblies and photo-eye lenses. We diagnose and fix the real problem the first time, not just reset the breaker and leave. For full detail on openers, motors, and access systems, see Electric Gate Repair in Mentone.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Mentone
Gate installation in Mentone means building for wind, dust, and long driveway runs, not just setting posts and hanging a panel. The most common installs we do here are automatic gates on rural driveways, where the gate has to hold up to Santa Ana gusts while the opener stays clean and functional through dry, dusty summers. A properly installed Mentone gate is anchored below frost line, sized for the wind load, and paired with an opener matched to the gate’s weight and the driveway’s slope. For a broader look at our installation approach, see Gate Installation.
Automatic Gate Installation
Signs you need it
Your current gate is manual, or the existing opener is too weak for the gate’s weight and you want keypad, intercom, or remote access.
What it costs in Mentone
Expect $5,500 to $9,500 installed for a complete automatic gate with opener, depending on gate size, opener type, and power access.
How we do it
We survey the driveway, pour or set the post footings below frost line, hang and align the gate, then mount and program the opener and safety sensors.
Sliding Gate Installation
Signs you need it
Your driveway slopes inward or space is tight, so a swing gate would drag or block the drive; a slide gate tracks parallel instead.
What it costs in Mentone
A sliding gate in Mentone typically runs $3,500 to $8,000, with the higher end covering longer gates and concrete track work.
How we do it
We set the track and guide posts, hang the gate panel, install the rack and pinion, and tune the opener to run smoothly on the track.
What Gate Installation Costs in Mentone
| Item | Typical range in Mentone |
|---|---|
| Driveway gate installation | $2,000 – $6,500 |
| Sliding gate installation | $3,500 – $8,000 |
| Automatic gate with opener | $5,500 – $9,500 |
How long does a gate installation take in Mentone?
Most residential gate installations in Mentone take one to two days once materials are on site. Custom welded steel gates and jobs requiring concrete curing for gate pads or slide tracks can add a day or two.
Do you handle the power run and safety edges for automatic gates?
Yes. We run the low-voltage line to the opener, install photo-eye sensors and safety edges, and program remotes, keypads, and intercoms as part of the installation. Call (833) 320-4513 for an exact quote.
Brands We Service in Mentone
We work on LiftMaster, FAAC, BFT, and Linear equipment, among others, and we keep common control boards and remote kits stocked for fast turnaround in Mentone. That means a failed opener board does not leave your driveway open for a week while parts ship. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Mentone, CA
| Service | Typical range in Mentone |
|---|---|
| Gate repair service call | $89 – $149 |
| Hinge replacement | $150 – $350 |
| Gate wheel and roller replacement | $150 – $400 |
| Track repair | $200 – $600 |
| Gate opener repair | $250 – $650 |
| Control board replacement | $350 – $900 |
| Driveway gate installation | $2,000 – $6,500 |
| Sliding gate installation | $3,500 – $8,000 |
| Automatic gate with opener | $5,500 – $9,500 |
In Mentone, two things push prices toward the upper end of those ranges: long driveway runs that add wire and conduit work, and wind-hardening upgrades like heavier posts and extra bracing on swing gates. Every job is quoted and agreed before any work starts, so the number on the estimate is the number you pay.
Neighborhoods We Serve in Mentone
We cover all of Mentone’s 92359 ZIP code, from the older citrus-era parcels along Crafton Avenue to the newer rural-residential builds east toward the foothills, and the equestrian parcels throughout the unincorporated area. Typical response time for a service call in Mentone is same day or next morning, depending on call volume.
- Crafton Avenue corridor
- East Mentone foothills
- Mentone equestrian parcels
- Rural-residential lots off Highway 38
- Unincorporated Mentone, 92359
Service Area – Cities Near Mentone
Kensington Gate Repair serves the foothill and valley communities around Mentone. We work regularly in Redlands, CA, Highland, CA, and Loma Linda, CA for residential and commercial gate jobs, and we climb into the mountains for Running Springs, CA where wind and snow load create a different set of gate problems. If you are within reasonable reach of Mentone, call us and we will tell you straight whether we cover your property.
Serving Mentone, CA — Our Local Coverage Area
We’re based in the Mentone area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mentone
Most Mentone service calls are scheduled same day or next morning. We stock common parts for the openers and gate types common in the foothills, so many repairs are completed on the first visit. Call (833) 320-4513 and we’ll give you a straight arrival window.
Most residential gate installations on existing properties in unincorporated Mentone do not require a permit, but automatic gates with vehicle detection loops or gates near county road easements may. We check the current San Bernardino County requirements for your specific property before installation begins.
Yes. We identify the opener by its board layout, motor type, and wiring configuration, then match a replacement or repair path. Because we work across LiftMaster, FAAC, BFT, Linear, and other brands, we are not tied to one manufacturer’s catalog when parts are no longer labeled or supported.
Call Kensington Gate Repair at (833) 320-4513 for a free estimate on gate installation or repair in Mentone. We quote every job upfront, and the price agreed before work starts is the price you pay.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mentone Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Gilbert Torres"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Marisol Hernandez"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar