Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Mission Viejo, CA
Gate installation in Mission Viejo means working with homes built mostly between the late 1960s and the 1980s, where original wrought iron, redwood, and vinyl gates have reached the end of their service life. We repair and replace those gates, and we install new automatic systems sized for the city’s master-planned neighborhoods. If your gate is sagging, sticking, or refusing to open, call Kensington Gate Repair at (833) 320-4513. We diagnose the actual problem before quoting any work.
Why Mission Viejo Homes Are Different
Mission Viejo was built as a master-planned community, and most of the housing stock in the 92690, 92691, and 92692 ZIP codes dates to the original Mission Viejo Company tract build-out. That means the gates we see are not new construction. They are original redwood driveway gates, wrought iron pool barriers, and vinyl pedestrian gates installed when the homes went up, and they have been through forty to fifty Mission Viejo summers. The local climate works against them in a specific rhythm: hot, dry inland Orange County weather bakes wood until it splits and pulls out of square, then winter rains and the marine layer swell the same wood so gates drag on concrete. One season loosens hinges; the next seizes them. We adjust, rebuild, or replace those gates constantly, and the sagging-wood problem is so common here that we know to check the slab before we touch a hinge.
The other Mission Viejo factor is HOA governance. Many homes sit inside Planned Community developments with front-yard walls and gate standards set by the association. That affects material choice, color, height, and sometimes the operator you can install. We work with Mission Viejo homeowners and property managers through those requirements every week, and we always confirm what the HOA will approve before ordering a gate.
Styles & brands we work with
Our Main Mission Viejo Services
Mission Viejo homeowners call us most often for two things: a gate that will not close properly, and an electric operator that has stopped responding. Both are covered below.
Gate Repair in Mission Viejo
Most gate repair calls in Mission Viejo start with a wooden gate that drags or a wrought iron gate that has pulled away from its post. The original hardware on 1970s and 1980s homes was never meant to last this long, and the seasonal swelling and shrinking of wood plus rust on steel hinges keeps us busy year-round. We reset posts, rebuild hinge mortises, replace latches, and square gates that the Mission Viejo heat has warped. If the gate is worth saving, we save it. If the frame is too far gone, we will tell you that plainly and show you what replacement costs. Learn more at Gate Repair in Mission Viejo.
Electric Gate Repair in Mission Viejo
Electric gate problems in Mission Viejo usually trace back to the operator, the control board, or the safety sensors. The dry inland heat shortens the life of control boards and motors, and we regularly replace components on original single-family automatic driveway gates across the 92690, 92691, and 92692 ZIP codes. We run through the full system rather than swapping the first part that looks suspect, because a loop detector fault and a failing motor can produce the same symptom. Our technicians work daily with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Full details at Electric Gate Repair in Mission Viejo.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Mission Viejo
Gate installation in Mission Viejo is almost always a replacement job, not a fresh build. The original Mission Viejo Company tract neighborhoods put up gates in the late 1960s through the 1980s, and those gates have now outlived their design life by a decade or more. Wood has splintered in the inland heat, wrought iron has rusted at the welds, and vinyl has gone chalky and brittle. The job here is not just hanging a new gate – it is rebuilding the posts, setting the hardware, and often adding an operator the original home never had. We handle that full scope, from tear-out to final programming. See more about our process at Gate Installation.
Automatic Gate Installation
Signs you need it
You are opening and closing the gate by hand every time because the original home never had an operator, or the old operator failed and you are tired of the walk.
What it costs in Mission Viejo
Automatic gate installation in Mission Viejo typically falls between $3,200 and $8,000 depending on gate size, operator type, and whether new conduit and power must be run.
How we do it
We assess the gate weight and cycle frequency, recommend an operator from the brands we service, set posts and hinge points, then run power, mount the arm or ram, install safety edges and photo eyes, and program remotes and keypads.
Driveway Gate Installation
Signs you need it
The existing driveway gate sags on its hinges, scrapes the sloped Mission Viejo driveway concrete in summer, or has rotted posts that no longer hold the gate square.
What it costs in Mission Viejo
A new driveway gate in Mission Viejo, including posts and hardware, generally runs from $4,500 to $12,000 depending on material and width.
How we do it
We remove the old gate, drill and set new posts in concrete, hang the new gate with adjustable hinges, square it to the driveway slope, and install a latch and stop that hold it through the seasonal wood movement.
What Gate Installation Costs in Mission Viejo
| Item | Typical range in Mission Viejo |
|---|---|
| Manual pedestrian gate, wood or vinyl | $850 – $2,800 |
| Automatic driveway gate with operator | $4,500 – $12,000 |
| Full automatic gate installation with new posts and power | $3,200 – $8,000 |
Prices above are quoted and agreed before any work starts. Material choice, gate width, and whether we are reusing existing posts or setting new ones move the number inside those ranges. HOA-approved finishes in Mission Viejo planned communities sometimes add cost, and we confirm that before ordering.
How long does gate installation take in Mission Viejo?
Most gate installations in Mission Viejo take one to two days once materials arrive. Custom gates, especially HOA-specified designs, add lead time on the fabrication side, typically two to five weeks before we schedule the install.
Do you handle the permits and HOA approval in Mission Viejo?
We prepare what your Mission Viejo HOA or Planned Community requires for gate design, color, and height, and we work with the association to get approval before any material is ordered. For installations that need city permitting, we tell you at the quote stage and handle the documentation on our end. Call (833) 320-4513 and we will walk you through what applies to your street.
Brands We Service in Mission Viejo
We service DoorKing, Elite, Mighty Mule, and LiftMaster among the nine major gate and operator brands our technicians work on. Because we are brand-agnostic, we stock common boards, remotes, and safety parts locally for the operators most common in Mission Viejo and diagnose against the system you actually have, not the brand we prefer to sell. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Mission Viejo, CA
| Service | Typical range in Mission Viejo |
|---|---|
| Gate service call and diagnosis | $95 – $165 |
| Gate hinge replacement, per hinge | $85 – $220 |
| Gate latch repair or replacement | $110 – $280 |
| Steel gate weld repair | $150 – $350 per section |
| Wood gate re-square and adjust | $140 – $320 |
| Operator arm or ram replacement | $400 – $1,100 |
| Control board replacement | $350 – $850 |
| Gate wheel, track, or roller replacement | $180 – $420 |
| Pedestrian gate installation, wood or vinyl | $850 – $2,800 |
| Driveway gate installation with posts | $4,500 – $12,000 |
| Automatic gate installation with operator | $3,200 – $8,000 |
Mission Viejo prices run slightly higher than coastal Orange County on custom wrought iron and automatic systems because many HOAs require specific finishes and because the inland heat pushes us toward heavier-duty operators rated for frequent dry-weather cycling. Every quote is a fixed number, in writing, before we start.
Neighborhoods We Serve in Mission Viejo
We run calls across all three Mission Viejo ZIP codes. Our response window for most repair diagnostics in the area is same-day when scheduled before noon, and next-day for installs and planned work.
- Lake Mission Viejo
- Alicia
- Northwood
- Casta del Sol
- Pacific Hills
Service Area – Cities Near Mission Viejo
Kensington Gate Repair also serves the communities that border Mission Viejo. We work in Coto De Caza, CA on large estate gates and privacy gates, in Lake Forest, CA on older tract homes with original hardware, in Laguna Hills, CA on HOA-governed Planned Community gates, and in Rancho Santa Margarita, CA on newer builds and pool barriers.
Serving Mission Viejo, CA — Our Local Coverage Area
We’re based in the Mission Viejo area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mission Viejo
For a gate stuck open or an operator that will not respond, we can usually reach homes across the 92690, 92691, and 92692 ZIP codes the same day if you call before noon. Afternoon calls are typically diagnosed next morning. Call (833) 320-4513 and we will tell you the earliest window for your neighborhood.
In most Mission Viejo Planned Community developments, yes. Your HOA likely regulates gate height, material, color, and whether you can add an operator. We check those requirements before ordering anything and will not start a job that could get you a compliance letter two weeks later.
The number we quote is the number you pay unless we uncover a structural problem that was not visible at the estimate, in which case we stop and get your sign-off on the change before any additional work. You will never get a surprise invoice at the end of a Mission Viejo job.
If your Mission Viejo gate is sagging, rusted, or refusing to respond to the remote, call Kensington Gate Repair at (833) 320-4513 for a free estimate. We will diagnose the real problem, quote a fixed price, and get your gate working like the day it was hung.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mission Viejo Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Eduardo Garcia"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Diego Castillo