Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Placentia, CA
Gate installation in Placentia usually costs between $2,800 and $9,500 depending on whether you’re upgrading a postwar wrought-iron gate on a 1960s tract home or running a new automatic driveway gate on an alley-loaded lot near Old Town. We’re Kensington Gate Repair, and we’ve served Placentia since 2011 as a dedicated gate specialist – not a general contractor who occasionally hangs a gate. Call (833) 320-4513 for a free estimate on any gate project in the 92870 or 92871 ZIP codes.
Why Placentia Homes Are Different
Placentia’s housing stock splits along a line that most other Orange County cities don’t have. The historic Old Town and Atwood core dates to the 1920s through 1950s, with citrus-era bungalows and detached garages sitting on narrow alleys. Then you have the 92870 and 92871 tract subdivisions built in the 1960s and 1970s, where nearly every single-family home has a driveway gate or a rear-alley security gate. That dense grid of alley-loaded lots – a leftover from the city’s packing-house past – means rear property gates take a beating from weekly trash trucks, recycling pickups, and contractor traffic. We routinely find alley-side hinges and latches that wore out years before the street-facing hardware showed any problem at all.
Climate adds another layer. Santa Ana winds dry out and warp wood gates, and they accelerate rust on bare steel frames. Winter rains swell wood and expose failing hinge hardware. Placentia gates need seasonal adjustment and re-sealing that coastal Orange County homes simply don’t. When we install a gate here, we account for that swing from hot and dry to wet without adjusting our approach mid-year.
Styles & brands we work with
Our Main Placentia Services
Most calls we get from Placentia homeowners and property managers fall into two categories: a gate that won’t open or close properly, and an electric operator that stopped responding. Here’s what each covers.
Gate Repair in Placentia
Gate repair here usually means a sagging steel or wood gate on a 1950s-to-1970s home, often with rusted hinge welds or a latch that no longer catches. On alley-loaded blocks, the rear gate tends to fail first from trash-truck impacts and constant use. We straighten frames, replace hinges, re-hang gates that have drifted, and fix latches and posts. See Gate Repair in Placentia for a full breakdown of what we fix, what it costs, and response times.
Electric Gate Repair in Placentia
When the motor hums but the gate doesn’t move, or the remote stopped working altogether, that’s an operator or control board problem. Placentia’s electric gates sit on driveways and rear alleys where dust from Santa Ana winds gets into limit switches and sensors faster than it does in coastal cities. We diagnose operators from LiftMaster, FAAC, BFT, Linear, and others, then replace the failed component rather than selling you a whole new system. See Electric Gate Repair in Placentia for repair details and pricing.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Placentia
Most Placentia gate installations fall into two camps: replacing an original wrought-iron or chain-link gate on a 1960s or 1970s home that’s rusted through at the hinge welds, or adding a new automated driveway gate to a home that’s never had one. The alley-grid layout near Old Town means many jobs involve rear gates that see heavy trash-truck traffic, so we spec heavier hinges and reinforced frames there than we would on a front-facing driveway gate. Whether you’re replacing a sagging gate or planning a full electric installation, one call covers everything from measurement to final programming. That’s the full scope of our Gate Installation work.
Automatic Gate Installation
Signs you need it
You have a manual gate that you’re tired of opening by hand, or a gate you want secured with keypad or remote access.
What it costs in Placentia
An automatic gate installation in Placentia typically runs between $3,800 and $8,500 depending on gate length, operator type, and whether power already exists at the gate.
How we do it
We measure the opening, confirm the gate weight and travel path, install the operator and safety edges, run or connect power, and program remotes and keypads before testing full travel.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted, sagging, or no longer suits the look you want, or you have an open driveway that needs a security barrier.
What it costs in Placentia
A new driveway gate in Placentia usually costs $2,800 to $7,200 for a single swing or slide gate, with the higher end covering ornamental steel and automation.
How we do it
We remove the old gate and posts if needed, set new posts in concrete, hang and balance the new gate, then install any operator and access hardware you’ve chosen.
Sliding Gate Installation
Signs you need it
Your driveway slopes sharply or has limited swing clearance, so a slide gate that travels parallel to the fence line is the only practical option.
What it costs in Placentia
Sliding gate installation in Placentia generally falls between $4,500 and $9,500 because it requires a steel track, roller assembly, and often a taller operator post.
How we do it
We pour or anchor the track base, set the roller posts, hang the gate on the track, install the operator and rack gear, and check full travel and stop points.
What Gate Installation Costs in Placentia
| Item | Typical range in Placentia |
|---|---|
| Standard driveway gate (manual) | $2,800 to $5,500 |
| Automatic gate installation | $3,800 to $8,500 |
| Sliding gate installation | $4,500 to $9,500 |
Prices above are what we quote and agree with you before any work starts – no surprise invoices after the gate is hung. In Placentia, expect the upper end when the gate opens onto an alley that gets weekly trash-truck traffic, because we reinforce hinges and posts for impacts that front gates never see.
How long does a gate installation take in Placentia?
Most residential gate installations in Placentia take one to two days from concrete work to final programming. Larger sliding gates or jobs with new electrical runs from the house to the gate can take three days.
Do I need a permit for a gate installation in Placentia?
Placentia generally requires a permit for new gate posts set in concrete and for any electrical work feeding an automatic operator. We pull the right permits and handle the inspection scheduling, so you don’t chase paperwork. Call (833) 320-4513 and we’ll tell you what applies to your property.
Brands We Service in Placentia
We stock common replacement parts for LiftMaster, FAAC, and BFT operators right on our trucks, which keeps many Placentia repair visits under two hours. We also service Linear and other majors, and because we’re brand-agnostic, we recommend whatever fits your existing system – not whatever we happen to have on the shelf. Read more about our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Placentia, CA
| Service | Typical range in Placentia |
|---|---|
| Gate repair (labor only) | $150 to $500 |
| Hinge replacement | $180 to $400 |
| Gate re-hanging and realignment | $250 to $600 |
| Latch or lock replacement | $120 to $300 |
| Welding repair | $180 to $550 |
| Electric gate operator repair | $350 to $900 |
| Control board replacement | $450 to $1,100 |
| Automatic gate installation | $3,800 to $8,500 |
| Driveway gate installation | $2,800 to $7,200 |
| Sliding gate installation | $4,500 to $9,500 |
Two things push prices up in Placentia: alley-facing gates that need heavier hardware to survive trash-truck contact, and electric jobs where power has to be trenched from the house across a long driveway. Whatever the number, we quote it before any work begins and we hold to it.
Neighborhoods We Serve in Placentia
We cover all of Placentia, from the citrus-era alleys of Old Town and Atwood to the tract subdivisions spread across the 92870 and 92871 corridors. Most repair calls in the city can be scheduled within one to two business days, and we work around your availability for installation jobs.
- Old Town Placentia
- Atwood
- Placentia Village
- Tri-City area
- Alta Vista
Service Area – Cities Near Placentia
We also serve the surrounding Orange County cities. If you’re in Brea, CA, Anaheim, CA, Fullerton, CA, or Yorba Linda, CA, give us a call and we’ll schedule a visit. The same gate specialists cover all of these areas.
Serving Placentia, CA — Our Local Coverage Area
We’re based in the Placentia area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Placentia
Most Placentia repair calls are scheduled within one to two business days. If your gate is stuck open or won’t close at all, call (833) 320-4513 and we’ll prioritize your visit.
Yes. Many Placentia tract communities have HOA design rules for gate style and height. We supply the drawings and specs your HOA needs, and we work within their approval timeline before any installation begins.
Both ZIP codes are in our regular service area. Whether you’re near Tri-City Park or off Yorba Linda Boulevard, we schedule the same crew and the same free estimates.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Placentia Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Rosa Delgado"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Gilbert Torres"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Marisol Hernandez