Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Redlands, CA
Gate installation in Redlands usually runs $2,800 to $9,500 for a complete automated driveway system, and most older homes here need custom work rather than an off-the-shelf kit. Redlands is a city of 1890s Victorians, Craftsman bungalows, Spanish Revivals, and mid-century ranches, and a gate that suits a Prospect Park estate rarely fits a 1970s tract home without modification. We handle the entire job: design, fabrication or sourcing, concrete footings, operator installation, and final programming. If your gate is failing or you’re planning a new one, call Kensington Gate Repair at (833) 320-4513.
Why Redlands Homes Are Different
Redlands grew up as a citrus-belt city, and that history still shapes the gate work we do here. Many of the properties around Prospect Park, Smiley Heights, and the neighborhoods off Sunset Drive still have their original ornamental iron or wood gates, some dating to the early 1900s. Those gates were built with hand-forged hinges, vintage latch sets, and non-standard post spacing, which means a repair often calls for welding a cracked scroll or fabricating a replacement hinge on site instead of bolting on modern hardware.
The climate adds another layer. Redlands summers run dry and hot, and metal gates expand enough in the heat to bind against their posts. Welded joints rust from winter dampness and then snap under the next windstorm. Santa Ana winds rack old hinges and twist gate frames, while wood gates dry-crack and warp in the low humidity. In the 92373 and 92374 ZIP codes especially, we’re frequently matching obsolete hardware to preserve the original character of a home rather than replacing it with something that changes the look entirely.
Styles & brands we work with
Our Main Redlands Services
Two services account for most of the calls we take from Redlands homeowners and property managers.
Gate Repair in Redlands
We repair manual and automatic gates across Redlands, from downtown Craftsman bungalows with side-yard gates to larger estate properties near Lugonia Avenue. The work often starts with a rusted hinge or a gate that’s dragging, and on older iron gates in this city that usually means welding or fabricating a replacement part rather than a hardware-store swap. We also handle racked frames from Santa Ana wind events, broken latch sets, and gate posts that have shifted out of plumb. Full details are on our Gate Repair in Redlands page.
Electric Gate Repair in Redlands
Automated gates fail in predictable ways here: control boards cook in summer heat, loop detectors lose sensitivity after heavy rain, and motors burn out from fighting a gate that’s been out of alignment for months. We diagnose the actual fault before quoting anything, whether it’s a LiftMaster swing operator, a Linear slide motor, or an older FAAC unit. For commercial property managers near the 92374 corridor, we handle access system issues as well as the mechanical side. See Electric Gate Repair in Redlands for specifics.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Redlands
Gate installation in Redlands almost never starts with a box from a big-box store. Homes here range from century-old Craftsman and Spanish Revival styles to 1950s ranches and newer planned communities, and each era demands a different gate: an ornamental iron double-swing for a Prospect Park driveway, a modern horizontal slide for a tight side-yard, or a wood courtyard gate that matches a 1920s bungalow. The climate also shapes the job. Redlands heat and Santa Ana winds mean steel needs proper priming and powder coating at the welds, posts need footings deep enough to hold a racked frame, and automated systems need hardware rated for sustained dry heat. Call (833) 320-4513 for a free measure and a written quote before any work begins. You can also learn more about the full scope of what we do on our Gate Installation page.
Automatic Gate Installation
Signs you need it
Your gate is manual and you’re tired of getting out of the car, or an existing operator has failed and replacement parts are no longer supported.
What it costs in Redlands
Automatic gate installation in Redlands typically runs $3,200 to $9,500 depending on gate size, operator type, and the amount of concrete and conduit work involved.
How we do it
We survey the drive, set the operator and gate posts in concrete, run power and safety loops, mount the operator and arms, and program remotes, keypads, and vehicle sensors.
Driveway Gate Installation
Signs you need it
Your driveway has no gate, or the existing gate is too narrow, too rusted, or no longer closes properly.
What it costs in Redlands
Driveway gate installation in Redlands typically ranges from $2,800 to $8,000 for a manual gate, with automation adding to the total.
How we do it
We confirm property lines and setback requirements, dig and pour footings, build or source the gate to fit the opening, and hang it with hardware matched to the gate’s weight and swing direction.
What Gate Installation Costs in Redlands
| Item | Typical range in Redlands |
|---|---|
| Manual driveway gate (single swing) | $2,800 – $5,500 |
| Manual driveway gate (double swing) | $5,000 – $8,000 |
| Automatic gate system (operator, safety, controls) | $3,200 – $9,500 |
Do I need a permit for a gate installation in Redlands?
Many Redlands driveway gate projects need city approval, especially anything automated or taller than typical side-yard fencing. We review permit requirements for your specific property and coordinate the paperwork as part of the installation, so you’re not left guessing.
How long does gate installation take in Redlands?
Most Redlands gate installations are completed in two to five working days, including concrete curing time. Older properties with non-standard post spacing or custom fabrication needs can add a few days while we build or source matching components.
Brands We Service in Redlands
We service LiftMaster, FAAC, BFT, and Linear gate operators across Redlands, along with equipment from other major manufacturers. Common boards, arms, remotes, and safety edges for these brands are stocked locally, which keeps most repair turnarounds short. See our brands for the full list of what we work on.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Redlands, CA
| Service | Typical range in Redlands |
|---|---|
| Service call and diagnostic | $75 – $120 |
| Gate hinge replacement | $150 – $350 |
| Gate wheel replacement | $120 – $250 |
| Gate post repair or reset | $250 – $600 |
| Gate frame welding repair | $180 – $450 |
| Gate lock or latch replacement | $90 – $220 |
| Electric gate motor replacement | $600 – $1,600 |
| Control board replacement | $400 – $900 |
| Loop detector replacement | $300 – $650 |
| Safety sensor or photo eye replacement | $150 – $350 |
| Manual driveway gate installation (single) | $2,800 – $5,500 |
| Automatic gate system installation | $3,200 – $9,500 |
Older Redlands properties with ornamental iron or non-standard hinges push prices toward the upper end of those ranges because parts must be fabricated or welded on site. Whatever the job, your price is quoted and agreed before any work starts, and that number doesn’t change unless the scope does.
Neighborhoods We Serve in Redlands
We work throughout Redlands, from downtown’s historic streets to the newer communities on the south and east edges of town. Response time for gate calls across the city is typically same day or next morning depending on call volume.
- Prospect Park and Smiley Heights
- Downtown Redlands and the historic district
- Sunset Drive corridor
- South Redlands and the 92373 neighborhoods
- East Redlands and Lugonia Avenue area
Service Area – Cities Near Redlands
Our service area extends beyond Redlands to the surrounding communities. We regularly work in Mentone, CA, Loma Linda, CA, Highland, CA, and Colton, CA. If your gate is acting up and you’re in one of these cities, the same team that handles Redlands gate work can be there.
Serving Redlands, CA — Our Local Coverage Area
We’re based in the Redlands area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Redlands
Most Redlands gate calls are scheduled same day or next morning. If your gate is stuck open or sealed shut, call (833) 320-4513 and we’ll tell you exactly when a technician can be there based on the current schedule.
Yes. For gate installations that require city approval, we handle the permit coordination directly with the City of Redlands as part of the project. For repairs, permits are rarely needed, and we’ll let you know upfront if your job triggers anything.
We do. Many gate calls in Redlands come from HOA communities where the gate is common-area property. We coordinate with property managers, follow any architectural standards the HOA requires, and provide invoicing in the format the association needs for its records.
If your gate in Redlands needs work, call Kensington Gate Repair at (833) 320-4513 for a free estimate. We’ll diagnose the problem, give you a written price, and get it fixed right the first time.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Redlands Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Ramon Salazar"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Eduardo Garcia"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Diego Castillo