Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Running Springs, CA
Gate installation in Running Springs is a different animal than what you’d find down the hill. Most of the homes here sit on sloped, heavily wooded lots with long driveways that need swing or sliding gates built for uneven terrain, not flat suburban entries. Kensington Gate Repair has served Running Springs since 2011, and we’ve installed and repaired enough mountain gates to know that what works in Highland fails fast at 5,500 feet. If you’re planning a new gate or struggling with an existing one, call (833) 320-4513 for a free estimate.
Why Running Springs Homes Are Different
Running Springs sits between 5,000 and 6,000 feet in the San Bernardino Mountains, where 40 to 60 inches of annual snowfall reshapes the work completely. Gates here fail for reasons that never show up down the mountain: ice damming against the gate frame, snowplow piles pushing into the swing arc, and freeze-thaw cycles that heave posts out of plumb by an inch or more every season. A gate that latched cleanly in October can bind hard by February, not because the hinges wore out but because the ground under the post moved.
The housing stock compounds it. Many Running Springs properties are older mountain cabins from the 1940s through the 1970s, mid-century A-frames, or newer custom builds on steep, wooded parcels. Driveways are often sloped, curved, or gravel-topped, and the gate posts frequently sit in decomposed granite that drains differently than valley soil. That changes how we set posts, how we choose openers, and how we account for snow-load capacity on every install. Newer gates on older posts is a mismatch we see constantly, and it’s the first thing we check when a Running Springs customer says their gate “just stopped working.”
Styles & brands we work with
Our Main Running Springs Services
Running Springs homeowners and property managers call us most often for two jobs: fixing gates that the mountain has abused and diagnosing electric gate systems that stopped responding after a storm or a power surge. Here’s how each works in this area.
Gate Repair in Running Springs
Most Running Springs gate repair calls involve a gate that won’t latch, sags on the hinge side, or drags against a track full of pine needles and ice. The freeze-thaw cycle here quietly shifts post alignment every winter, so a gate that swung freely in the fall can bind by spring. We straighten frames, reset or replace posts, rehang gates, and rebuild latch hardware so the gate works through the next snow season rather than just for the next two weeks. Learn more about Gate Repair in Running Springs.
Electric Gate Repair in Running Springs
Electric gate failures in Running Springs often trace back to something environmental: moisture inside a control board after a wet snow, a loop sensor buried too shallow for frost depth, or a motor burned out from pushing against an ice-dammed track. We diagnose the system brand by brand rather than swapping parts blindly. That matters when a FAAC board fails differently than a Linear one. See how we handle automated systems at Electric Gate Repair in Running Springs.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Running Springs
New gate installation in Running Springs starts with terrain and snow, not with a catalog. We’re building swing and sliding gates for sloped, wooded lots where the gate has to clear snow berms, survive plow strikes, and keep working after a winter of freeze-thaw cycles. That means heavier-duty posts, snow-load-rated hardware, and opener selection matched to the driveway’s grade and surface. If you’re considering a new gate, Gate Installation is our full-scope service, from first measurement to final programming.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car in snow or rain to open the gate by hand, or you want controlled access without replacing a functioning gate frame.
What it costs in Running Springs
Automatic gate installation in Running Springs typically runs $1,800 – $8,000 depending on gate size, opener type, and how much site prep the slope demands.
How we do it
We measure the gate and driveway, confirm the posts can carry an opener, mount the operator, run power and control wiring, install safety edges or loops, and program remotes and keypads.
Sliding Gate Installation
Signs you need it
Your driveway is too steep or too short for a swing gate to be practical, or a plow pile keeps blocking the swing arc every winter.
What it costs in Running Springs
Sliding gate installation in Running Springs typically runs $2,500 – $9,000, with the higher end covering longer gates and motors built for heavier loads.
How we do it
We set a track or cantilever foundation that can handle snow and gravel, fabricate the gate to fit the driveway width, install the motor, and tune the travel and safety settings.
What Gate Installation Costs in Running Springs
| Item | Typical range in Running Springs |
|---|---|
| Automatic gate opener installation | $1,800 – $8,000 |
| Sliding gate installation | $2,500 – $9,000 |
| Full custom gate fabrication and install | $3,000 – $12,000+ |
Does snow affect gate installation in Running Springs?
Yes. We schedule installs around freeze-thaw conditions, set posts below frost depth, and select hardware rated for snow load, otherwise a gate installed in October can bind by January in Running Springs.
Can you install a gate on a sloped Running Springs lot?
We do it routinely. Sloped lots in Running Springs often need sliding gates or swing gates with offset hinges and reinforced posts, and we measure the grade before recommending a design.
Brands We Service in Running Springs
We work on FAAC, BFT, Linear, and Viking systems among others, and we keep common boards, remotes, and safety parts stocked for Running Springs service calls. That means less waiting on parts when your opener quits mid-winter. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Running Springs, CA
| Service | Typical range in Running Springs |
|---|---|
| Gate repair service call | $75 – $150 |
| Hinge replacement | $150 – $400 |
| Gate opener repair | $200 – $600 |
| Control board replacement | $300 – $900 |
| Gate post reset or replacement | $400 – $1,200 |
| Automatic gate opener installation | $1,800 – $8,000 |
| Sliding gate installation | $2,500 – $9,000 |
| Full custom gate fabrication and install | $3,000 – $12,000+ |
Snow damage and frost-heaved posts are what push Running Springs prices toward the upper ends of these ranges, along with steep driveway access that makes setting posts and running power more labor-intensive. Every job is quoted and agreed before we start work, so the number you approve is the number you pay.
Neighborhoods We Serve in Running Springs
We cover all of Running Springs and the surrounding mountain communities in the 92382 ZIP, working on gates along Highway 18, Green Valley Lake Road, and the residential streets branching off both. Typical response for a gate repair call in Running Springs is same-day whenever conditions allow; installations are scheduled around weather and site access.
- Green Valley Lake
- Arrowbear Lake
- Smiley Park
- Running Springs town center
- Dart Canyon
Service Area – Cities Near Running Springs
Beyond Running Springs, our mountain and foothill service area includes Lake Arrowhead, CA and Crestline, CA, plus the down-the-hill communities of Highland, CA and Mentone, CA. If your gate is acting up anywhere in this part of the San Bernardino range, call us.
Serving Running Springs, CA — Our Local Coverage Area
We’re based in the Running Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Running Springs
Yes. We run mountain-service routes through snow season, and we carry the gear to work on ice-damaged gates in Running Springs. If roads are open, we get there. If your gate is stuck open or won’t close, call us and we’ll tell you honestly when we can reach you.
It depends on your specific Running Springs neighborhood and whether you’re on county or private road frontage. We’ve worked with local HOAs and know what questions to ask, but the homeowner or property manager is responsible for securing written approval before installation starts. We can help you figure out who to contact.
We cover the mountain communities along Highway 18, including Arrowbear Lake and Green Valley Lake, plus Lake Arrowhead, Crestline, and down into Highland and Mentone. If you’re unsure whether we reach your street, call (833) 320-4513 and we’ll confirm before you schedule anything.
If your Running Springs gate is failing, sagging, or refusing to open after a storm, call Kensington Gate Repair at (833) 320-4513. We’ll diagnose the problem, quote the repair or replacement before any work starts, and get your gate functioning for the next snow season instead of just the next week.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Running Springs Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Eduardo Garcia"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Diego Castillo"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Rosa Delgado